The skirting board is mounted on stretch ceilings so that all the cracks between the ceiling and walls are hidden and do not spoil the appearance of the room. A room without such skirting boards will look sloppy and sloppy. Decor is most often made from polymers. Planks can be simple or with a printed pattern, their width can be different. The purpose of any ceiling plinth is to conceal the technological gap.
When installing a stretch ceiling, it is easiest to use special skirtings, in the mounting profiles of which a place for attaching the canvas is provided in advance. But at the same time, there are few options for such products, most skirting boards are mounted using glue. It should be borne in mind that they can not be glued to the stretch ceiling. There are several reasons for this. First of all, the weight of the skirting board may cause sagging thin PVC film, which is used for the manufacture of stretch linens. In addition, adhesives often contain solvents that can cause damage to polyvinyl chloride.
It is also worth considering that rigid fixation of the film in stretch ceilings is not provided, it can change its position. It is impossible to glue in such conditions, since a reliable connection cannot be obtained. After drying, the adhesives create a certain tension, which can cause wrinkles and wrinkles on the ceiling. The tensile structure will inevitably suffer if for some reason it is necessary to dismantle the baseboard glued to it.
The surface of the baseboard adjacent to the wall should be as large as possible to exclude the possibility of quick detachment of the decor. This is the only way to ensure reliable installation of skirting boards.
The length of the products should be selected according to the size and shape of the room. Most often, this parameter is one meter and thirty centimeters. It is advisable to use two-meter variants of the ceiling plinth in large rooms.
Calculating the required number of skirting boards is not so difficult. The total length of the perimeter of the room must be increased by about forty to eighty centimeters in order to provide the necessary supply. Next, the resulting figure should be divided by the length of individual skirting boards. If it is necessary to paint the products, it is better to do this before installation, since both the wall and the ceiling canvas located too close can get dirty during operation.
-
10 rules on how to best repair an apartment for rent
-
Soundproofing and soundproofing of plastic windows
-
The advantages of houses up to 150 square meters. m
-
What errors lead to water hammer in the heating system and how to avoid them
-
12 tips for choosing a good construction team
-
How to make repairs once and for a long time
-
5 reasons to change the wizard without waiting for the repair to finish
-
When is it better not to glue paper wallpapers?
-
Why you can’t save money by installing infrared heating instead of gas
-
When an adjustable floor is more profitable than a capital screed
-
Smart sockets: why call a coffee maker or kettle
-
7 mistakes that people usually make when self-organizing home construction
New publications are published daily on our channel in Yandex. Zen
Go to Yandex. Zen
