How to fix the problem with condensation on the toilet bowl

Probably, many were faced with the problem of condensation on the toilet flush tank. This is a rather unpleasant phenomenon, which contributes to the formation of a high level of humidity in the toilet room. Consider why this is happening and how to handle it.

The formation of condensation on the toilet bowl can occur for the following reasons:

• With frequent use of the toilet, the water does not have time to warm up to room temperature, as a result of which, condensation forms;
• Due to malfunctioning valves and drain, there is a constant outflow of warm water from the tank and its replenishment with cold water from the water supply;
• Due to the suspended humidity of the room, this problem mainly concerns the combined bathrooms, the evaporation of water from faience and plastic surfaces is much slower;
• Due to poor room ventilation;
• When located next to the toilet heating pipes.

How to fix the problem

Climate change in the room

If faulty ventilation is to blame for the formation of condensation, the microclimate of the toilet should be completely changed. Be sure to call specialists who will clean the ventilation ducts and ducts. Additionally, install a forced-air and exhaust ventilation system in the toilet room.

It will also not be superfluous to install a heating element. It will help maintain a comfortable indoor temperature and quick drying of moisture.

Rise in water temperature

In order to minimize the difference in temperature difference between liquids in the pipeline and toilet bowl, it is necessary to warm the pipes. This will reduce the difference by a few degrees. It is possible to lay hot water in the immediate vicinity of the cold. But you can act much easier, just buy a toilet with two different flush modes. When half the tank is emptied, a mixture of cold and hot water occurs, which helps to reduce the time of natural heating.

Reducing the volume of the drain tank

There are several ways to reduce tank volume. For example, purchase a new toilet with such functions. Or set up a drain system so that the float does not allow water to collect more than the required level. You can also try a simple folk method, put a bottle of water in the tank, which will significantly reduce the volume of liquid being poured.