Chromotherapy may also be provided in the jacuzzi.

Not everyone knows that as many as two types of jacuzzis are currently offered by manufacturers. First of all, these are ordinary hot tubs. Air-water jets perform the role of a masseur. There are also combination whirlpool bathtubs, in which air bubble flows are also present. The effect of water procedures in the second case is much higher, since both hydromassage and air massage nozzles can be launched at the same time.

People usually start thinking about hot tubs when planning to increase their comfort. The functionality of such products helps to improve health, but the choice should be treated carefully. It is advisable to adhere to the recommendations of doctors. Universal options for a jacuzzi are usually expensive, but why not buy just such a model, if funds allow?

The number of basic massage functions in modern models can reach ten. It’s easy to deal with them, since they differ from each other only in the location of the nozzles, which determines the area of ​​massage. But at the same time, there may be additional options and opportunities, the choice of which should be taken as carefully as possible. It can be, for example, a system for disinfection and water purification. Constantly draining and collecting new water can be costly if the bath volume is large. Disinfection and filtration systems help solve this problem. Their design provides for an ultraviolet emitter and a filter system. Such solutions are usually not included in the jacuzzi package, so they must be ordered separately.

It is also worth clarifying the presence of backlight. It is usually mounted either in the bottom or in the sides of the bowl. The purpose of the backlight is exclusively decorative, but its presence can enhance the effect of massage, create the appropriate mood.

Chromotherapy may also be provided in the jacuzzi. With different wavelengths of light affect the body. A wide range of radiation from built-in devices makes it possible to implement this treatment technique. Lamps should be adjusted according to the recommendations of the attending physician. On a person, all colors have a certain effect. Soothing and relaxing, for example, affects green; red is used to stimulate the nervous system.

Aromatherapy can also be provided in the hot tub. It will be a real find for people suffering from respiratory diseases and allergies. In the modern jacuzzi there are special dispensers of aromatic oils, which portionally throw aromatic substances into the air or into the water. Someone may find some of the described functions unnecessary, but they can have a significant effect on the condition and well-being of a person, so you should not underestimate them.

Three main materials are used for making a jacuzzi: acrylic, steel and cast iron. In this case, there is no difference from ordinary baths. The last two options are gradually fading into the past. This is explained by the fact that cast iron and steel bowls usually have standard shapes and are distinguished by their large weight. To make exclusive options from these materials, of course, you can, but their cost will be ten times higher when compared with acrylic analogues. Acrylic is much more suitable for a jacuzzi, so most of these products are made today of it.

The basic mechanisms and internal details of the jacuzzi are quite simple. This is a lot of tubes and a compressor. There are already two in the combined compressor models. Of course, this is a simplified description, but it can give an idea of ​​the inside of the technique. When planning a jacuzzi purchase, you need to think about the place of installation during the repair. Of communications, sewerage, plumbing and electricity are definitely required. The first two systems should be brought as close as possible to the floor surface, since hydromassage baths are usually connected to them from below. Access to communications should be free, as well as to the internal equipment of the bathroom itself.

Installation of a jacuzzi is carried out by several people. This is explained by the dimensions of the product. At least a couple more assistants will need to be involved in the process due to the size and weight of the jacuzzi. The bowl is mounted on a metal frame. When assembled, it is already delivered from the factory. Next, you just need to raise the frame and install it where you want. But at the same time you cannot make mistakes, you need to expose the design using the level. Poor installation will result in quick damage to the compressor or pumps.

The electrical part during installation must be given special attention. Human safety depends on the correct wiring. We must not forget to ground the bath, to equip the protective shutdown device with a power supply branch.