How to mask a burn on a carpet

The cost of a high-quality carpet is large enough, care must be taken carefully. Significantly reduce the life and spoil the appearance of any damage and contamination of the carpet. Even if you treat the flooring very carefully, it is impossible to carry out prophylaxis, to completely insure yourself against a burn or spill on the carpet of any substances. However, most problems can be eliminated independently, at home.

First of all, you can talk about the restoration of the carpet when a burn appears on it, for example, from a cigarette. It is not so difficult to get rid of shallow damage. To eliminate the burn, you will need to stock up with fine-grained sandpaper. It is her who in a circular motion neatly cleans the place of damage to the coating. Small burns can be removed after just this manipulation.

If cigarettes or an iron have left more serious marks on the carpet or carpet, part of the product will most likely need to be replaced.

A piece that is suitable for texture and coloring can be purchased at hardware stores. The cut area of ​​the carpet or carpet is simply replaced with a new one. With sandpaper or a razor, the pile length is leveled if the new material is more voluminous and fluffy.

Sometimes shoes also leave traces that resemble burns. It is much easier to eliminate them if there is a washing vacuum cleaner. Cleaning products in this technique can be loaded different. However, most often washing vacuum cleaners are used during the general cleaning, since their use is a very laborious task.

Very often, carpet damage occurs due to spilled liquids. Remove it from the surface as quickly as possible, because otherwise the consequences for the carpet can be fatal. Some liquids are able to burn out the pile, soak deep into the coating structure. Dry wipes can be used to remove fluid. They need to be applied until the entire spilled substance is completely absorbed. In this case, you must try not to smudge or rub the stain. After removing the liquid, you can fill the damaged area with pure mineral water and dry the pile again with napkins. Repeat the procedure until the traces are completely gone.

A lot of carpet damaging substances can be removed only with the help of certain chemicals. If you have such a flooring in your home, you should buy a universal solvent, with which you can easily remove many dirt and some burns.