It is no secret that to ensure proper coziness and comfort in the house, a heating system must function in it. Moreover, its effectiveness often depends not only on the power of the radiators, but also on the place of their deployment.
With the proper installation of heating appliances, you can significantly save the budget. Indeed, for thorough heating of the premises will require much less time and energy.
Most often, radiators are installed under the window. However, in some cases it is more expedient to mount them in another place of the room.
Heating radiator installation options
Batteries in a house or apartment can be mounted:
- Under the windowsill;
- In a special niche;
- On the surface of the wall.
It is important to understand that each of the radiator installation options has its own limitations and rules that must be followed. The most common option is to install a battery under the window. In this case, the necessary convection of air is provided and warm air is evenly distributed throughout the room. At the same time, it is recommended to give preference to radiators with built-in air cut-offs that allow heat to be removed from the windowsill, which can prevent its spread.
In what cases do you need to install radiators under the window?
If the external walls of an apartment building or a cottage are poorly insulated, it is not recommended to install heating radiators under the windowsills. This is because most of their energy will be given to warm a cold wall and the room can be cold and not comfortable.
In this case, it is recommended that the heating equipment be mounted on another wall in the room. It is important to make sure that it can support the weight of the structure.
In some cases, you may need to install a battery in the corner of the room. This option is advisable if two external walls converge in it, creating a large area that serves as the heat output from the room. Heat loss can be compensated by installing a radiator in a corner.
In any case, it is worth remembering the importance of observing all installation requirements. Each heating radiator must be mounted on a flat wall surface without distortions. To reduce heat loss, you can use a metallized film, which is glued to the back of the battery. Such thermal insulation will reflect warm air, and return it to the room.
-
What boards can not be used for half-timbered
-
Why does the grinder work, but the disk does not spin
-
Features of the installation of half-timbered columns
-
How to make a rectangular cutout in ceramic tiles
-
What to do if wallpaper glue dries too fast
-
What mistakes are made when the radiator is connected diagonally?
-
When an adjustable floor is more profitable than a capital screed
-
What primers are not suitable for application under fiberboard
-
What installation errors lead to the leakage of the polycarbonate canopy
-
How to cut glued tiles on a wall
-
How to paint from spray can without smudges
-
How to dissolve the clypeus along its length
New publications are published daily on our channel in Yandex. Zen
Go to Yandex. Zen
