Why not repair a leaking tap in the kitchen and bathroom

Plumbing breaks down often, so leaking tap is difficult to scare someone. Each home master will be able to fix the malfunction, but there are reasons why this should not be done.

Why you don’t need to repair the tap

Plumbers believe that there are only three good reasons for not fixing the tap yourself:

1. The faucet was recently purchased and its warranty has not yet expired. In this case, it is easier to take the goods to the store for replacement.
2. The crane constantly breaks and flows. Either the plumbing is too old, or poor-quality and very budget. In this case, it is better to replace the cranes, since who knows what can happen in the absence of the owners in the apartment.
3. No experience repairing plumbing. If a person does not understand plumbing at all, then there will be only problems from such a fix. You can accidentally break the crane and make a flood or do worse than it was and the flood will come at the most unexpected moment.

Key issues and solutions

There are four main reasons why leaks occur: poor plumbing, wear on the connecting elements, rust and limescale, and improper installation.

instagram viewer

In valve taps, leaks are usually associated with wear on the gaskets in the area of ​​the conical plug. To troubleshoot, just purchase a new consumable.

Semi-fan taps usually suffer from loose slurry seals, and to correct the situation, it is necessary to tighten them in time. The nut rotates clockwise at the base of the axle box, until it stops. If after handling the crane continues to flow, then it is necessary to change the packing of the gland, for this the ring is unscrewed, the packing is wound on the valve stem, the structure is assembled back.

It happens that a leak forms near the union nut, so at first it is simply tightened. If the actions do not give results, then it is necessary to remove the gasket between the pipe and the mixer. Typically, leaks at this location result from deformation of the gasket, which must be replaced.

In more modern lever mixer systems, leaks also occur, in order to find out their cause, it is necessary to shut off the water and drain its residues from the mixer. To disassemble the structure, it is necessary to unscrew the screw, lever, remove the handle. The lever is removed only when its movements do not meet resistance. After that, the disk cartridge changes.