Why you need to choose a place for the counter in advance

Any installation of an electric meter must be carried out in compliance with safety regulations. Installation of such a device is a direct responsibility of each property owner. There is an opinion that the location of the meter should be determined at the earliest stage of planning. We will try to determine how much this is, and what could be the consequences if this rule is ignored.

First of all, it is worth considering that the place of the meter should be convenient for its checks and maintenance. If you do not take this fact into account in advance and install a meter at the end of the apartment, then a simple reconciliation of the indicators can cause inconvenience when you visit an employee of the energy supply company.

The current standards stipulate that the distance of the meter should not be less than 170 cm from the floor and 80 cm from the ceiling. Not taking these parameters into account in advance, you can get not only a fine, but also be required to reorganize the location of the meter.

If the installation is carried out in a private house, the provider company can set its requirements for its installation on the facade of the house. It is often practiced to install the device on a post located on a house plot.

The meter installation location must be agreed with the energy supplying company. This happens by submitting a written request indicating the reason for replacing the device or changing its location. In case the first connection of the property is carried out, the development of technical documentation will be required, which takes an impressive amount of time. Only after its approval can you start installing the device.

When determining the location of the meter, it is very important to consider how much the selected place will be convenient. It is also necessary to take into account the applicable safety regulations. If the procedure is carried out in a private house, it should be remembered that it is subject to approval by the energy supplying company. Her representatives very much require the owners to forcibly take the device to the facade of the building. If you do not take into account the procedure, there is a risk of problems with the supply of electricity. Untimely approval can significantly delay the entire repair process.