Which walls do not need to monitor hanging furniture

Hinged furniture is an element of the interior that is found in all houses and apartments, so it is important to know which wall it will rest on and will not fall off after a couple of weeks. In the modern market for each coating and material there are fasteners for hanging furniture, therefore, the connection of lockers and drywall, aerated concrete, brick or wooden beams is equally strong.

How to fix hinged furniture

The offer in the construction market will satisfy any demand for fasteners and related materials for furniture. Some walls require additional reinforcement in the form of plywood.

If in your home there is a risk of shrinkage of the structure, then for fastened furniture, sliding fasteners are used. The lower part is stationary, and the upper slides as needed. To install such fasteners and predict shrinkage of walls, it is better to contact specialists.

Drywall walls

Most often, doubts arise about the strength of drywall walls. Since they are often used in the construction or remodeling of an apartment, several proven methods of fastening have been developed.

Why you can’t hang furniture on bare drywall: drywall walls are hollow, slabs can not withstand point loads, the material crumbles and cracks.

Set mortgage beam

The beams are installed during the installation of the drywall frame and laid at the required installation height. They are lintels from a metprofile with nested wooden blocks.

This method is used when installing a kitchen set. At the same time, a wooden beam is attached to the profile with self-tapping screws.

Horizontal Bus Installation

Often complete with accessories for kitchen sets is a rigid metal bar, on which you can hang cabinets. Such a tire is installed over the entire total width of the wall cabinets.

It is the tire that interacts with the wall, so it should be bolted as tight as possible. The bar should take the maximum load on itself and distribute it along the plane of the sheet. The tire is attached to the metrofiles of the wall frame, in places where it is absent, it is necessary to use a dowel. You can find the frame using the magnet.

If there was no tire in the kit, then its alternative is wooden bars and metal strips. The timber should not be large.

Dowels

Screwed dowels, plastic or metal, are the easiest and fastest way to install hanging furniture. But when using it there are restrictions on the maximum weight. The maximum permissible load on such dowels is 25 kg.