Any good housewife strives to ensure that all the taps in the house always shine. However, tap water contains a large amount of mineral substances, which sooner or later create a calcareous deposit and white streaks. After each use of the mixer, be sure to wipe it with a dry cloth so that the stains form as slowly as possible. But at the same time, it will not work out completely, since tap water usually flows very hard and saturated with minerals. Limescale from time to time needs to be removed by additional means.

The easiest way to clean limescale is to use household chemicals, which are available in excess in stores. The rules for its use are easy to follow. It is strictly forbidden to use any bleaches to remove stains from chrome plumbing, as they violate the structure of the material and only exacerbate the situation.

You need to choose tools that are designed specifically for a particular material for the manufacture of plumbing.
Not everyone knows, but different chemicals should not be mixed. Hazardous vapors may occur due to their interaction. Foamy and liquid products are more preferable because micro-scratches form on the plumbing surface from powders. It is necessary to use household chemicals with gloves to avoid allergies and skin burns.

Without special household chemicals, limescale can also be cleaned. This will require simple home remedies, such as vinegar. Nine percent table vinegar is bred for this purpose one to one with water. Damaged plaque is treated with a sponge or cloth dampened in the resulting solution. After the surface is washed with clean water and wiped. A vinegar compress can be used for places with particularly severe pollution. In this case, the fabric is soaked in heated vinegar and wrapped in plumbing. Rinse with water the treatment site after about an hour or a little more. In the end, you also need to wipe it with a dry rag. Removable parts can be omitted into the vinegar solution. This helper removes even a long-standing plaque remarkably.

Both soda and citric acid cope well with such contaminants. The surface of the tap must be wiped with a cloth dampened with either one or the other. As well as after vinegar, the treated areas are washed with clean water and wiped dry. You can use a toothpick to tidy up hard-to-reach spots.





-
10 rules on how to best repair an apartment for rent
-
Soundproofing and soundproofing of plastic windows
-
The advantages of houses up to 150 square meters. m
-
What errors lead to water hammer in the heating system and how to avoid them
-
12 tips for choosing a good construction team
-
How to make repairs once and for a long time
-
5 reasons to change the wizard without waiting for the repair to finish
-
When is it better not to glue paper wallpapers?
-
Why you can’t save money by installing infrared heating instead of gas
-
When an adjustable floor is more profitable than a capital screed
-
Smart sockets: why call a coffee maker or kettle
-
7 mistakes that people usually make when self-organizing home construction
New publications are published daily on our channel in Yandex. Zen
Go to Yandex. Zen