Content
- 1 Where does the raid appear in the tank
- 2 Why the tank needs to be cleaned
- 3 How to clean the tank
Not every housewife wondered how to clean the toilet flush tank. At least once a week, the bowl is thoroughly cleaned, since all the smudges and brown coating are visible, but if you look into the drain tank, you can find a terrible picture. The tank inside is also covered with a thick layer of deposits, which must be removed.


Where does the raid appear in the tank
Tap water in almost every corner of the country is not of high quality. It contains many metal salts, as well as other harmful chemicals. If pollution is always visible on the plumbing or in the teapot, then they rarely look into the drain tank.
Therefore, over time, more and more salts of calcium, magnesium and iron settle on the walls of the tank. If the lid is loose, dust appears in the container. Thus, fungus can be bred on the walls. Earthenware tanks are most quickly covered by a slimy layer of deposits.

Due to the porous structure of the material, contaminants can penetrate deeper, from where it becomes more difficult to remove.
Why the tank needs to be cleaned
Why is it so important to clean the drain tank if the dirt in it does not spoil the appearance of the plumbing? Because particles of metal salts, mold and dust accumulate around the drain valve, forming a thick plug. Over time, the valve will no longer fit snugly to the drain hole, which will provide free flow of water from the tank to the bowl.

In addition, not only the walls of the tank, but also the elements of the flushing mechanism are covered with a coating, and this is fraught with their breakdowns. The float lever or the moving part of the mechanism can jam or fail.
In addition to the above reasons, the tank should be cleaned for reasons of sanitation. Since a thick coating of mucus and deposits provokes the multiplication of some bacteria that can enter the toilet bowl or rim.

How to clean the tank
To clean the tank, it is necessary to turn off the water supply tap and drain all the water from it into the bowl. The inner walls can be sanitized using the following means:
- Abrasive powders - perfect for cleaning faience and other porous ceramics. The procedure is performed using an iron or hard sponge, after applying the composition, wait about 10 minutes and wash it off with dirt;
- Liquid gels - with the help of Domestos or Comet, you can perfectly disinfect the inner surface of the tank. The composition can be applied using any sponge and left for any time;
- Special plumbing substances with acids. Perfectly clean and disinfect the tank from the inside.





-
Because of what the sewage system is very quickly clogged
-
Audi Bed: Buying Benefits
-
The most reliable wire connection without a soldering iron
-
How to permanently get rid of late blight in a greenhouse in autumn in two steps
-
What will happen if the painted ceiling is painted
-
What is the best way to connect a voltage relay
-
Gross errors when choosing the thickness and length of the profiled sheet for the roof
-
Why you should not buy blinds in a bedroom
-
5 models of computer chairs that will harm your health
-
What should not do the floor in the bathroom
-
Is it worth gluing wallpaper on curved walls
-
What to do with the ceiling if it is crooked
New publications are published daily on our channel in Yandex. Zen
Go to Yandex. Zen