Why the automatic machine in a guard is constantly cut down

The circuit breaker can trip due to many circumstances. In most cases, to determine the reasons why the fuse is triggered, absolutely everyone can. You do not need to be an electrician with thirty years of experience. This article will discuss the main causes of this problem.

Power overload

This circumstance is quite common. In case of overload, the switch will automatically shut off the network in order to avoid serious consequences. This is its main purpose. This problem is often found in houses equipped with old wiring. She simply can not withstand the voltage that comes from all devices. In such situations, you cannot connect all electrical appliances to the network at once. Turn them on alternately to avoid overloading. However, if the circuit breaker operates constantly, then you should seriously think about replacing all the wiring in the house.

Equipment breakdown

It often happens that the fuse blows when a single device is plugged into the network. It becomes quite clear that it is he who is faulty. In such cases, you should contact the workshop that is engaged in the repair of household appliances. When contacting such services, you should clearly talk about your problem so that the specialist can quickly detect a breakdown.

Wiring failure

This problem is rare. It lies in the fact that a short circuit occurs inside the wiring, which causes the fuse to trip. In this case, it is necessary to carry out a thorough check of your wiring. Moreover, this must be done as soon as possible, otherwise a fire may occur. As a rule, this procedure will take a large amount of time. In this situation, it is best to hire a professional electrician. It is highly recommended not to independently dismantle the wiring.

Circuit breaker does not work properly

Some people may encounter a problem with the fuse of the fuse itself, which mistakenly blocks the power supply. Perhaps he is simply defective, or his life has already expired. However, this problem cannot always be quickly detected. Often people write off everything for wiring, without even thinking that the matter is a fuse. Ridding yourself of such a problem is quite simple. Buy a new machine.