There are many options for skirting boards that are suitable for installing heating pipes in them. This option is much easier than pouring into a screed, the job takes much less time and does not require special skills.
People who decide to embed pipes into the skirting board will first of all be faced with the difficulty of choosing suitable materials. Finishing materials must necessarily meet the following requirements:
- Possess low combustibility;
- Be resistant to various chemicals;
- Have a low coefficient of thermal expansion;
- Be easy to install and maintain;
- Be resistant to moisture.
In addition to the above indicators, the plinth for installing pipes should have an aesthetic appearance. Currently, there are many options, so the baseboard can be selected for absolutely any interior. Skirting can be made of plastic, wood or metal. If the material does not meet the requirements, then this is a violation of fire safety, which can lead to fire.
When choosing the material from which the heating circuit is made, first of all, pay attention to operating conditions. The most budgetary option are plastic skirting boards, but at the same time they are the most unreliable. Over time, they can crack, which will significantly impair their appearance and require replacement.
If the skirting boards are made of wood, then before installation they must be treated with stain and varnish, as well as an insecticidal agent designed to prevent and eliminate the grinder beetle. The Antizhuk tool is perfect. Wooden skirting boards are one of the most expensive. But, if their processing is performed correctly, then they can be used for many years. Another advantage is that it is possible to replace their color with a stain of the desired shade. Such a replacement can be carried out repeatedly.
It is also possible to encounter some difficulties when attaching structures. It is worth considering that mounting to the wall the brackets of the rear of the finish under the pipelines is a danger. This is due to the fact that there is a possibility of a violation of the tightness of the seals in the thread joints.
-
The good and bad batteries with automatic heat control
-
Why is it important to maintain the required humidity level when painting?
-
How to prepare an apartment for a long trip
-
Where you should not put a washing machine in the bathroom
-
Why do people choose stretch ceilings
-
The worst water supply options for a country house
-
What you will face if you combine a balcony with a room
-
How to save on furniture
-
The window between the bathroom and the kitchen, what to do with it?
-
Facade stone decoration: tips and tricks
-
Red color in the interior: the rules of combinations
-
What lighting to choose for a bathroom?
New publications are published daily on our channel in Yandex. Zen
Go to Yandex. Zen
