Why do people do open wiring at home

Open wiring is electrical communications laid over walls. This variety is the simplest compared to the walled up, it is faster and easier to perform.

Why do open wiring

Open wiring has many advantages over a hidden variant. For its installation it is not necessary to violate the integrity of the walls; its installation does not accompany a large amount of debris and dust.

There are several reasons why people decide to make open wiring:

• Installation is made in the old house;
• In wooden houses only open wiring is used;
• Electrical wiring is mounted in the event of a change in home ownership;
• The owners of the apartment or house use open wiring as an element of the "retro" style;
• Conventional wiring changes.

But the installation of open wiring does not mean at all that the cables will hang on the wall in any way. For installation use: roller porcelain insulators, plastic staples, metal pipes or corrugated, skirting boards with a special groove, twisted copper wires, patch sockets and circuit breakers.

Wiring in an old house

Installation of hidden wiring in old walls is almost impossible. Brick under the influence of time becomes very fragile and additional exposure to it can lead to a partial collapse or destruction of the wall.

You can also accidentally damage other communications hidden in the wall, such as pipelines. In addition, in order to organize hidden wiring in the old house, you must obtain permission from the appropriate authority.

Wiring in wooden houses

Open wiring in wooden houses is used to exclude fires. With this installation, an air gap should be maintained between the wires and the wall, so they are most often insulated into metal tubes.

Protection is also necessary to prevent the accumulation of flammable dust and to isolate from rodents.

Retro style

A distinctive element of the retro style is twisted copper wiring, which is located on the surface of the walls. A growing number of people are becoming adherents of this interior design.

Together with copper wires, the use of china sockets and switches for each individual lighting device is mandatory.

Replacing old wiring

If the existing hidden wiring constantly fails, and the question arises of replacing it, then the easiest way is to resort to open-type installation. It is used to preserve wall cladding and to minimize damage.