Decorating room walls using decorative plaster is by far one of the most popular. The coating has a fairly expensive and stylish appearance. However, all this is possible only on condition of correct and accurate execution. It is not uncommon in the process of work that a number of errors are made that lead to a poor result.
In order to exclude the presence of hidden defects, it is necessary to make sure that the plaster layer does not peel off the wall surface, that there are no smudges and other third-party spots. Plaster should be completely devoid of potholes, cracks and bulges, not provided for by the decorative texture. All of these defects are easily identified by visual inspection.
There are still defects of a technological and operational nature. The first are formed during the plastering process itself. Often they appear in the form of cracks, bubbles, swelling and exfoliation.
Operational defects appear only with time - during operation. To exclude and minimize them, it is recommended to periodically inspect the surface and timely eliminate defects at an early stage.
All methods to repair damage to decorative plaster are to completely replace the unusable area with a new layer.
There are several basic rules for repairing a defective area of decorative plaster:
- Joints and corners are necessarily equipped with a metal mesh.
- It is important to mix the solution with high quality in order to comply with the norms of its consistency.
- The layer applied to the wall should have an average volume.
- To prevent the plaster layer from drying out, its surface must be wetted with water during operation.
- Each layer applied to the surface must completely dry before the next one is applied.
As for the repair algorithm itself, it can be called monotonous, since regardless of the level defect, first remove the damaged area to the very base and only then the procedure occurs plastering.
It should be noted that the process of restoration of Venetian plaster or travertine is much more complicated, since in addition to replacing the layer, additional creation of a textured element with a spatula and sponges.
-
How to check the quality of work so as not to miss out on defects in finishing
-
How to get a fine for repairs in an apartment
-
Frame walls: construction method
-
What walls can be easily demolished in an apartment
-
On which coating can not be laid laminate
-
What you need to know about rack ceiling components before buying
-
How to put cork tiles on the floor
-
What mounting errors will spoil even the best polycarbonate
-
What to do so that the paint does not drip from the brush
-
What you need to know when designing a half-timbered house
-
How to calculate the repair time in order to catch an important event
-
How to make "fur coat" plaster without a special tool
New publications are published daily on our channel in Yandex. Zen
Go to Yandex. Zen
