In the process of finishing a bathroom or kitchen, the consumer in most cases prefers tiles as a finishing material. Sometimes in the process of laying various kinds of difficulties arise, for example, the corner of one of the tiles simply protrudes and all this affects the appearance, sometimes it even interferes with installing the door, and so on. In general, this problem needs to be solved, but what about what, not to shift everything? It is best to cut the tiles, but how to do it, which is better to use for these purposes?
What tools are suitable for work?
If the tile has already been laid, it is best to use a criminal grinder or grinder for cutting, but in no case is it recommended to use the following equipment:
- Glass cutter and pliers.
- Jigsaw.
- Tile cutter.
- Diamond wire.
- Sharp tongs.
The use of a grinder is due primarily to the fact that you can perform the work accurately and correctly, otherwise various problems may arise:
- Neighboring tiles can split into two parts, thereby spoiling the entire appearance of the coating.
- The nearest area may not adhere completely, so that voids form, which will lead to the floor becoming unusable.
- Tiles may crack and peel off over time.
How to cut tiles correctly?
As already mentioned, it is best to use a grinder with a diamond disk for work. But the tool must have a speed control.
The algorithm of actions is as follows:
- On the grinder should set the average speed.
- Immediately it is worth preparing a rag and water, as well as a vacuum cleaner.
- First, make the mark a marker, that is, determine a suitable cut line.
- Connect the grinder to the network and walk several times on the surface of the tile.
- From the beginning to the end of the label cut the tile.
- If until the very end does not get to carefully make an incision, then it is worth using a hammer with a chisel.
- Contamination should be cleaned with a rag and water, and dust should be removed with a vacuum cleaner.
- Make sure that everything is done efficiently, and if necessary, make adjustments.
If a mistake was made during the operation, then you can use a special casserole on the tile, and if this is a joint between With two floor coverings, it is best to use a special sill that masks everything and improves the look.
-
Important nuances about the Chandelier in the living room
-
How a plastic skirting board can ruin an entire design
-
Different types of lighting in the kitchen and their advantages
-
Gothic style in architecture: mystery and mysticism
-
Common mistakes when choosing a kitchen corner
-
How to purchase a production room?
-
The most practical colors for the floor in the apartment
-
What is good about aluminum furniture
-
Why there is no effect from noise insulation of doors
-
Interior of a small kitchen: interesting ideas
-
Kitchen Design: Chess Finish
-
Why glass magnesia is a bad idea for wall insulation
New publications are published daily on our channel in Yandex. Zen
Go to Yandex. Zen
