What are the shortcomings of the electrical wiring in a wooden house dangerous to the lives of residents

When installing electrical wiring, mistakes can be made that subsequently bring unpleasant and even dangerous consequences. Therefore, the work must be trusted to professionals, and in the case of the decision to conduct their independent work, it is imperative to familiarize yourself with the basic errors.

Incorrectly installed wiring in a wooden house can cause fire.

Rules for installing electrical wiring in the house

Before starting the wiring of electricians in the premises, a carefully thought-out project of the house should be drawn up. Wiring must be carried out immediately in all rooms, and therefore a sufficient amount of time should be allocated for the work.

When choosing wiring products, it is categorically impossible to save and purchase it from unverified manufacturers. Very often low-quality elements fail, causing a short circuit in the electrical network, because they are not able to withstand rated loads.

It is recommended to purchase electrical wiring with a margin. Thanks to this approach, you can protect yourself from a possible shortage of cable length or the number of outlets in the midst of installation work. Also, this will make it possible to abandon the use of the method of twisting electric wires, which significantly reduces their reliability and safety.

What do wooden house owners need to know?

When installing electrical wiring in a house from profiled timber or other lumber, it is worthwhile to place it away from the wall sheathing. Failure to do so may result in accidental damage to the cable insulation during repair work. At the same time, one can not notice the fact of violation of its integrity, which will carry a hidden threat to residents.

Another common mistake is to carry out installation work without disconnecting the house from the power supply. Often, self-confident electricians sin. It is worth remembering that any work with wiring should be carried out after the house is completely disconnected from the power supply system, no matter how skillful the master would be.

When installing wiring in a wooden house, it is strongly recommended to use special brands of cables and wires. This rule should be observed and, if necessary, lay them outside the house. You can protect the wiring on the street using an additional element - a special corrugation that does not allow moisture to pass through.