What hidden problems are identified when installing a whirlpool bath

Many people, when repairing in the bathroom, want to dismantle the old bath and install a hydromassage. Such a bath has a large number of functions and, acting on the body with water jets, massages it, allowing you to relax and rest. Also, the effect of hydromassage has a positive effect on the condition of the skin, improves blood circulation and metabolism.

However, in the process of self-assembly, problems may arise, because the work can not be called a simple process.

The main difficulties when installing a spa bath

The first difficulty that can be encountered during installation is the incorrect connection of all structural elements. Their connection must be carried out strictly following the manufacturer's instructions. Any violation can lead not only to the failure of the mechanism, but also to the occurrence of leaks.

Another difficulty worth mentioning is that you need to connect a bath with a hydromassage system to three elements:

• Water supply;
• Sewers;
• Electrical network.

Mains connection

This stage is one of the difficult ones, because the liquid conducts electric current well, and therefore, if connected incorrectly, it can provoke a person’s defeat. Before connecting, you need to disconnect the house, and connect the structure to a grounded outlet using a cable with three wires.

Preparing the installation site

This stage is one of the most important. Reliably selected location will depend on the reliability of the connection and subsequent operation of the equipment. It is important to remember that it is impossible to integrate such a bath close to the wall. This will impede the possibility of prompt repairs.

Another problem is the inability to install the bathroom on the floor surface. Designs with hydromassage are characterized by a large weight, and therefore must be installed on a frame made of durable pipes previously. The frame must be attached to the floor surface to prevent loosening.

Hardware selection

When choosing fittings, many consumers are faced with a problem due to the supply of low-quality hoses. At this stage, you need to make sure the manufacturer is in good faith and his positive reputation in the market. Otherwise, the hoses may not withstand the pressure and burst, causing flooding.