How to make a spinning tray with your own hands: simple tips

A turntable is a useful item in every kitchen. It is especially relevant in a large family, where a company of several people gathers at the table. A spinning plate or tray is placed in the center of the dining area. You can place various sauces, snacks, toppings or just flowers on it for an original decoration. At the same time, it is easy to make the device at home using improvised items.

DIY turntable

This decorative element is widespread in Chinese restaurants. They serve salads, various appetizers and sauces for main courses. This is very convenient, since those sitting at the table can turn the plate towards them and take what they need.

The tray has the name Lazy Susan. However, it is not yet possible to establish its origin.

Necessary materials

It is not difficult to construct a rotating device with your own hands. It takes a minimal set of tools, savvy and a little time, coupled with diligence. For work you need:

• round board;
• stain, varnish or paint;
• screws and other types of fasteners;
• drill;
• Sander;
• sandpaper;
• a hammer;
• ruler;
• pencil;
• screwdriver;
• brush.

As a rotary mechanism, you can use a special rotating block or, for example, a spinner.

Step-by-step instruction

The sequence of work directly depends on the result that a person wants to get. If there is a simple stand without decorative elements, we perform the following manipulations.

1. Preparing the base. For this we take a tray. You can disassemble an old wooden chair by taking its seat for the main part of the future device.
2. Stripping. Remove the top layer of wood using a grinder. We completely process the workpiece from all sides.
3. Coating with paint. Next, we use a suitable composition to transform the base. Apply with a brush in several layers. At the same stage, decorative inscriptions or drawings are made.
4. Bottom markup. Using a ruler and a pencil, measure out the center of the structure and mark where the pivot mechanism will be placed.
5. Secure the rotating element exactly in the middle of the structure so that the tray does not fall over during use.
6. Installing the overlay. A circle made of corkboard will do.

At this point, the device is ready. You can also attach potholders, but this is not required.

Options for making a rotating table from available tools

If you don't have a turning mechanism at hand, and you absolutely don't want to go to the store for it, you can use items that are not related to repair. One of the options will be a spinner popular with teenagers. By fixing the newfangled gadget on the center of the tray from the bottom, you will get the desired result.

A difficult but entertaining option is using large beads. Using liquid silicone or glue, mark the stops on the bottom of the tray. Then beads are placed there and covered with an overlay. The rotation will take place due to the movement of large beads.

It is much easier and faster to buy a swivel mechanism. It is sold in every shop for decoration and renovation. The cost is affordable. The process of creating the device will be easy and enjoyable.