DIY wooden tray: original ideas

A wooden tray is a pleasant addition to the decor and an important attribute for romantic breakfasts in bed. In addition, it is convenient to use for family watching movies or when you need to feed your child outside the kitchen. In this case, the product can be designed with your own hands. Such an item will warm the soul and delight the family with a cozy, relaxed atmosphere.

How to make a wooden tray with your own hands with a photo

There are many manufacturing options. With or without handles, with high sides or almost flat, made of wooden corks, old paintings and other methods. In any case, a handmade product looks presentable and effectively complements the interior of the kitchen.

Stylish and high quality pieces are sold in stores. But their price is high. It is much cheaper and more interesting to make it yourself.

Required tools and materials

Making a tray from wooden elements is not difficult. The main thing is to have at hand a standard set of working tools:

• sandpaper;
• wood stapler;
• screwdriver;
• glue gun;
• jigsaw;
• hand saw.

In addition, you need to arm yourself with blank sheets, a ruler and a pencil in order to create preliminary sketches, which will later be transferred to the blanks.

Drawings of a tray made of wood

Before starting work, let's draw a sketch. At this stage, they are already thinking over the smallest details, including the decor. The drawings should have marks:

• width, length and height of the product;
• attachment points;
• docking of the sides, handles and legs of the tray;
• decoration area.

We carefully draw all the elements and transfer them to wooden elements.

Step by step guide

With experience, the process will not take long. The main thing is to follow the scheme and be careful when working with a hand tool.

There are several ways to make a wooden tray. The original options are simple to perform and available to everyone.

For breakfast

Such a tray can replace a small table with legs, can be used as a stand for various items. To make it, you will need boards or pieces of plywood, metal tubes in the amount of four pieces, corners of 15 mm - 8 pcs., Spacers 15 mm - 4 pcs., Varnish to cover the finished tray.

The work is carried out according to the following scheme:

1. Metal tubes are cut so that the edges are even. You will need 2 pcs. 58 cm each, 4 pcs. 25 cm, 4 pcs. 19 cm and 4 pcs. 6 cm.
2. Pipes of 25 cm are combined with 6 cm pipes and glued together using corners.
3. The resulting handles are applied to a wooden board and the attachment points are marked. The diameter should be equal to the circumference of the pipe.
4. The tabletop is cleaned with sandpaper and then covered with stain or varnish.
5. Next, gaskets are glued to the drilled holes on both sides.
6. The handles are threaded through them and connected to the legs.
7. Two tubes of 58 cm each are held together with corners. They will become a stand for the countertop.
8. At the bottom, 19-cm tubes for support are similarly fixed.

If you want to make a tray with folding legs, they are attached using pivoting mechanisms. And they also make a stopper in the form of a hook.

From a wall picture

Such a tray will turn out to be original and attractive. In addition to the main element, you will need decorative furniture handles, a piece of plywood that is equal to the size of the artwork, as well as fasteners and a screwdriver.

The handles are fixed to the sides with self-tapping screws. Next, the picture is taken out of the baguette and a piece of plywood is cut to size. A solid base of the future tray will be made of it. Glued to the base and secured back to the frame.

It is advisable to cover the picture with varnish so that it does not deteriorate during operation.

From photo frame

The principle of making the tray is similar to the previous version. It is better to choose a product with a plywood base. If you can't buy one, just get yourself a piece of wood.

The cardboard and glass are separated from the frame. Places for fasteners are drilled in the baguette and handles are installed. Saw plywood and attach cardboard and glass to it. If necessary, it is decorated with various elements or decoupage.

From traffic jams

This option will look unusual in any apartment. To produce it, you will need at least 100 champagne or wine corks. And also a piece of glass for the size of the future tray and superglue.

The algorithm of actions is as follows:

1. The plugs are divided into two parts with a sharp knife.
2. With the help of superglue, they are glued together to form a rectangular base.
3. Plexiglass is installed on top and cut to size.

Bumpers can be made from leftover cork or pieces of wood left over from old furniture or a tray.

The manufacturing principle is very simple. Anyone can make an interesting piece of furniture with their own hands, which is also useful in everyday life. He will add coziness to the kitchen and make breakfast unforgettable.