Window air conditioner in a plastic window: device and diagram - Setafi

Among low-cost devices in the field of air cooling, the window air conditioner circuit deserves special attention. It is much cheaper than other models, available for use, simple in design, and therefore does not require regular maintenance, and much more. Installing an air conditioner under the window also takes much less of your time and effort. We will talk about this method in the next couple of minutes.

Window air conditioner device

To understand what a window air conditioner is, it is worth talking about its design. The cooler belongs to the type of monoblock equipment - all components are in a single "box". She does not need additional details when connecting. This is the main difference between such devices and traditional split systems.

Window models are mounted in the window on wood or PVC frames. The air that enters the unit is cooled and supplied to the room, and the heated air is removed outside. The system is especially effective in rooms with a small square: the device provides enough cold air without creating much noise (or without it at all).

Inside the case are all the main components: heat exchangers, cooler, compressor, freon tubes, air distributors, drainage and other parts.

Yes, you can't do without noise in the main stream of models. The average is 50 dB. shows the strength of the built-in fan. The indicator can be reduced by adding a little soundproofing material.

How to fix the air conditioner

Window blocks, due to their small size, can be installed in several places at once:

1. On the windowsill - the most primitive and affordable installation option, which most users choose. A special hole is made inside the window. It is equipped with an air conditioner. Determine the parameters of your device in advance so that you do not need to modify window frames once again.
2. Window air conditioner in the upper part of the plastic window (on the window). Such placement requires additional means of fixation. Such an installation is especially necessary when there are small children in the house. And they like to stick their fingers anywhere.
3. Inside the wall. The main factor is fastening to the outer wall. It should give the necessary space for both installation and air circulation. Before inserting the window air conditioner, the hole must be reinforced with a metal case.

Top Tips to Get a Fully Working Cooling System

Before installing a window air conditioner, read this "memo":

•  for the device, you need to insert a separate electric machine into the switchboard;
•  extension cords should not be used to power the device;
• the outer part of the monoblock and the window should have a distance of less than 25-30 cm;
• from the bottom to the floor - at least 75 centimeters;
• on the sides we leave about 10 cm for servicing the device and natural ventilation;
•  to the nearest wall - at least 50 cm;
• in no way block the ventilation openings in the house;
•  in order for the condensate to drain properly, we place the device at an inclination of 0.5-1 cm. At the same time, it should not fall on one of the sides;
•  how not to damage the window and glass - fasten the entire block so that you can’t tear it off with your teeth later. Without this moment, you are unlikely to get something adequate.

How did you fix your air conditioner: in the window or through the wall? Tell us about your method in the comments!