Why do I need a fuse on the Indesit washing machine and where is it located? – Setafi

The fuse on the Indesit washing machine and other devices is usually located in the power cord or on the electronic board. This is a small but important element that protects the electronics and other parts of the device from power surges. How to find it yourself and determine the malfunction is described in this article.

Where can the fuse be located?

This part is located in different places - it all depends on the manufacturer, as well as on the specific model. It is best to find the electrical circuit in the instructions (device description) or in other open sources. It looks like a crossed-out rectangle, as shown in the figure (it can be located both horizontally and vertically).

You can also determine where the fuse is in the LG washing machine or other models yourself. There are several options, the most common are:

1. Inside the plug, which is connected to the outlet.
instagram viewer
2. From the other end of the power cord (inside the case).
3. Near the electronic board or directly on it.

To understand and find the fuse in the LG washing machine or other models, you can open the top cover. To do this, unscrew 2 screws and push the panel in the opposite direction. Then they remove it and find a fuse, which may look like the one shown in the photo.

Purpose and principle of operation of the element

The washing machine needs additional security in case of surges or insufficient power supply to the mains. This is a rather complex unit, equipped not only with mechanical parts, but also with electronics (a board with a processor). It is this element that most often suffers in the event of a short circuit or a sharp drop in the wiring, like a computer, as well as other modern devices.

The fuse, as the name implies, protects against these phenomena. Thanks to this, the board remains intact. Regardless of where the fuse is located on an LG washing machine or other models, it performs its function well. This allows you to insure against breakdowns and save on repairs.

The principle of operation of the element is quite simple, it is common to all electrical appliances. If the current increases in the wiring, one of the conductors of the device melts, due to which the circuit immediately opens, i.e. current stops flowing. The molten material looks like a tube with a small glass tube. It minimizes drops and takes a possible blow on itself.

Causes and signs of blown fuse

The fuse in the Bosch washing machine and other brands burns out for the same reasons. Moreover, the main one is a sharp power surge in the wiring, which is often observed during an accident or thunderstorm. But there may be other factors:

• failures in the electronics specified by the program;
• excessive loads;
• failure of a certain part of the device;
• wear due to long service life.

If the fuse in the Bosch washing machine or other brands has blown, you can determine the malfunction by a number of signs:

• the device stops working;
• suddenly turns off;
• won't start even after being plugged in.

Diagnosis at home

To make sure that this element is malfunctioning, you need to check it with a multimeter. The instruction is quite simple:

1. Switch the device to the resistance indicator determination mode.
2. Remove the fuse, put it on the table.
3. Press the probes of the multimeter to the contacts.
4. Fix the reading on the display in order to understand whether the fuse of the heating element of the washing machine is working or not.

If the tool shows 0 ohms, then the fuse is working, and the cause of the unit's malfunction is different. If it does not show anything, the element is clearly broken and needs to be replaced.

The violation may be due to a short circuit, for example, from the side of the heating element. Additionally, you can inspect it and, if necessary, replace it with a new one. It is important to understand that the fuse itself is also not repairable - only the replacement option remains. You can implement it yourself. But if there are no relevant skills, it is better to call a specialist.

Now it’s clear where the fuse is for the Bosch washing machine and other models. This is a small part that is often found in the plug itself or at the other end of the power cord. Since it protects the electronics, it can also be located on the board.

It does not matter where the fuse of the Ariston washing machine or other devices is located. The most important thing is to correctly determine the malfunction and, if necessary, replace the element.