Error F9 in the Atlant washing machine: meaning, causes, possibility of repair, consequences - Setafi

Error F9 in the Atlant washing machine always indicates a rather serious breakdown. They are connected to the engine, control module, tachometer or wiring. A system failure may also occur, which can be overcome by rebooting the device. In other cases, you will need to call a specialist.

Main reasons

Error code F9 is shown in several cases, all of which indicate a rather serious breakdown:

1. A malfunction in the operation of the tachometer, which controls the speed of rotation of the drum, that is, the number of revolutions in 1 minute.
2. Engine breakdowns.
3. Malfunctions in the wires that connect the engine and the control module.
4. The control module itself has broken down - in case of damage to the electronics, it will not be possible to run a certain program or the device will malfunction.

What to do when an error occurs

If error F9 appears on the Atlant washing machine or another type of malfunction, it is recommended to follow these instructions:

1. First you need to check if there is a system failure. Sometimes the electronic board with the processor freezes, as is the case with a computer or smartphone. Therefore, first of all, it is worth unplugging the plug from the outlet for literally 15 minutes and turning it on again, checking if the F9 error appears again in Atlanta.
2. If the message code still remains, then you need to check the Hall sensor. If it breaks, the drum starts to rotate too fast, and when spinning, on the contrary, slowly. As a result, clothes remain too wet.
3. Engine malfunctions. It is determined by the features of the rotation of the drum - it moves in jerks or stops altogether. You can also feel a burning smell, extraneous noise in the form of knocking and increased vibration.
4. Violation of electrical wires - in this case, the washing does not start or the process goes wrong, with a violation of the cycle.

In all the cases described, it is recommended to contact the service center, since self-repair is hardly possible. Moreover, inept actions can lead to other breakdowns, due to which restoration services will be more expensive.

Other types of errors

Sometimes the device can issue other types of violations, in practice, users most often encounter the following:

1. Error F3 in the Atlant washing machine appears due to improper water heating. It may be too strong or not go at all. Then the drain indicators will light up - 3 or 4. If at the same time an extraneous smell is felt, the heating element has probably broken. The part is not recoverable - it must be replaced.
2. Along with the F3 error, Atlant may also show the F4 code. It is associated with poor drainage of water - it stops or goes too slowly. At the same time, the rinse or wash indicator may light up.
3. If error F5 appears in the Atlant washing machine, the problem is related to a valve malfunction. You can conduct an independent diagnosis by removing the top cover and starting the feed (you need to substitute a basin). Next, the valve is opened by applying a standard voltage of 220 V to each coil. If this fails, you can measure the resistance using a multimeter.
4. If the designation F6 appears, this means a breakdown of the reverse relay, due to which the shaft rotates incorrectly. As a rule, the cause is associated with damage to the contacts or strong heating of the winding.
5. If the F7 error of the Atlant washing machine appears, repairs are required. But there are times when it is not needed. So, if the code F7 appeared, this indicates a weak voltage in the network. Therefore, you just need to wait a while to restore a stable supply of electricity.

Atlant washing machine errors can have various causes. Even one type of F9 code can indicate different malfunctions. If the breakdowns are quite serious, there are no simple solutions in such situations. Therefore, it is necessary to stop washing and contact the service center.