What are the error codes for Indesit washing machines? Causes of occurrence, can they be eliminated? – Setafi

Error codes for Indesit washing machines indicate various breakdowns that can be associated both with a specific element (for example, with a heating element) and with the whole system (drain, water supply). You can diagnose the cause by a code or a combination of indicators. How to do this is described in the article.

Basic codes

Indesit washing machine errors can be associated with a variety of elements, for example, with a heating element, a drain system, or even a processor board. The main causes of breakdowns and their designation on the display look like this.

F01

Such Indesit error codes occur quite rarely, they indicate problems in the operation of the electric motor. Usually the cause is due to low voltage in the network or a break. You should also check the various elements of the electrical system:

• fork;
• network cord;
• contacts;
• socket.

To understand exactly why error F05 appeared in the Indesit washing machine or another code, you need to use the device - in this case, a multimeter. In this case, the voltage indicator should be at least 215 V.

Also, Indesit errors, which are indicated by the F01 code, may also indicate a jammed drum. This is due to the ingress of an excess object or as a result of deformation of the bearing - the part requires a complete replacement. As a result, error F01 Indesit will no longer appear.

F02

When CMA Indesit error codes are associated with F02, this indicates a malfunction in the electronic control unit. And you need to check several elements:

• motor brushes (they wear out over time);
• contacts from the motor or speed sensor;
• motor winding - due to vibration, it is erased;
• internal wiring - can also wear out over time;
• control module - may suffer due to pollution or high humidity, as a result of which Indesit will show an error h20 or other codes.

F03

In this case, the sensor that controls the water temperature does not send a signal to the electronic module that controls all processes. The fault may be related to either one or another element. Therefore, if error codes for Indesit washing machines appear without a display or on the screen itself, it is worth checking both details:

1. On the board, they look at the contacts and, if necessary, solder the damaged elements.
2. To test the sensor, use a multimeter in resistance measurement mode. If it shows 0 or an infinity sign, the node has failed and needs to be replaced.

F04

Error codes Indesit without a display are more difficult to determine than on the screen. For example, if F04 lights up, you can say for sure that one of the elements of the water intake system has broken:

• a filter that purifies the liquid;
• hose (may become clogged);
• there is no pressure in the water supply at all or it is insufficient.

On some models, F07 may light up, but this does not change the essence - only the designations differ.

F05

Along with the water supply, there is also a system for draining it. If code F05 appeared in the Indesit washing machine, it means that a certain element of this chain has broken. Several tests are recommended:

1. Make sure there is no blockage in the sewer pipe.
2. Inspect the drain hose, as well as the filter, clean them if necessary.
3. Scroll the drain pump shaft by hand - it should give in, but with a certain effort. If a breakdown is detected and error F05 appears on the Indesit washing machine, then a new spare part needs to be installed.

F06

This code indicates that an electronics failure has occurred. If this is the first case, and electricity surges were observed the day before, the reason is probably related to this factor. It is recommended to turn off the unit, wait a few minutes and reconnect to the network.

Although if error F05 Indesit or F06 continues to appear, the breakdown is more serious. Surely it is necessary to inspect the board, the tracks burned out on it, the contacts are broken. Only an experienced specialist can perform this work.

F08

When error F08 appears in the Indesit washing machine, this indicates that the washing process cannot be completed because the water does not heat up enough or remains cool at all. Almost always, such a breakdown is associated with a faulty heating element.

You should act like this:

1. Remove the bottom panel and test the heater with a multimeter.
2. If too much scale has formed, it should be cleaned with a concentrated solution (for example, 2 teaspoons of citric acid in a glass of water).
3. It also happens that everything is in order with the heating element, but the liquid still remains cool. Then you should see how the sensor that controls the water level works. At the same time, you should not use the unit until the malfunction is eliminated, because it will not be possible to wash things normally.

F09

This is a serious breakdown, which indicates a malfunction of the control module. It is a board with a processor that controls all incoming data, for example, from a temperature sensor, water level, a device that measures engine speed, and others.

The board fails due to power surges or high humidity. If the failure is one-time, it is enough just to restart the unit, leaving it turned off for a few minutes. If this does not help, the device freezes or does not respond to commands at all, you should definitely contact the wizard for competent diagnostics and repair.

F10

Error F10 on the Indesit washing machine indicates that the water supply system has broken down. First of all, they check the pressure level in the cold pipe, open the valve at full capacity. But if this does not help, you need to inspect the following elements:

• filter (periodically needs to be cleaned);
• supply valve - must open when liquid enters;
• pressure switch - it also clogs or breaks.

F11

This code resembles error 05, but the reason in this case is related to a pump failure. You should measure the voltage by attaching the multimeter probes to the contacts. It is also important to make sure that the drain filter is working. If it is in order, the shaft is scrolled by hand and checked if it rotates normally.

F12

Also, sometimes an F12 error appears on the Indesit washing machine. She talks about a malfunction in the electronics. As a rule, it is recommended to reboot the device, in which the start button and the key labeled "ON" are pressed simultaneously. But if this does not help, and Indesit again shows the F12 error, you should contact the service center.

H20

Water supply and drainage problems are observed more often than other breakdowns - in this case, an Indesit H20 error may appear. Users are advised to check if there is pressure in the pipe and if it is strong enough.

The tap is opened to the full, then the mesh filtering the incoming liquid is checked. It will not be superfluous to inspect the drain hose - Indesit may give an error H20 due to the fact that it is below the level of the tank (should be raised higher).

How to identify errors by indicators

CMA error codes Indesit without a display is also quite realistic to determine, although it will be a little more difficult than in the case of a screen. If there is only one light bulb, diagnostics are carried out only by the number of its flashes. But if there are several such indicators, the check is carried out differently.

EVO-I

Devices with this module do not reflect Indesit error codes due to the lack of a display. But if the knob that selects the programs is constantly turning and the indicators are flashing, the error is set by the number of blinks and the combination of light bulbs (decoding is presented in the table below).

EVO II

Devices with this module also have several indicators. They can flash in different ways, and not all at once, but in a certain combination. Decryption can also be determined from the table. For example, if only the first indicator is on, then the Indesit washing machine shows error F01.

Series LOW END

For devices of this series, the cause is also diagnosed by combinations of different indicators, but the interpretation of the signals is slightly different.

Thus, most Indesit codes lend themselves well to deciphering. If the error indicates possible breakdowns of different nodes, they are checked one by one, analyzing the situation by the elimination method. But it also happens that the reason remains unclear. In these cases, contact the service center.