Why the washing machine does not turn on, the indicators do not light up? We deal with the problem with our own hands - Setafi

Sometimes users observe this situation: the washing machine does not turn on and the indicators do not light up. Moreover, they can even blink, but the washing process still does not go. The reasons for this phenomenon are very different, from simple to very serious. You can deal with some of them yourself - the corresponding instructions are described in the material presented.

First steps

If the washing machine does not turn on, this does not necessarily indicate a breakdown. First you need to perform a few elementary steps:

• make sure that the plug is inserted firmly enough;
• no damage to the cord, it is not pinched, not stretched;
• the socket itself is working (check by connecting another device);
• there is electricity in the house, and the voltage is sufficient (light bulbs do not blink).

These are the first steps that can be taken right away. Although often even after that the Indesit washing machine or another model does not turn on. In such cases, they look for other reasons, focusing on the recommendations of the specialists described in the following sections.

The unit does not turn on, all indicators are lit at once

It would be logical if the device did not turn on, and the bulbs did not burn either. But there is such a situation when the washing machine does not start, and at the same time all the indicators are on at the same time. Most often, they blink, which most likely indicates voltage drops in the electrical network.

This phenomenon is usually observed in rural areas, in private houses with old wiring. Although in a city apartment a sharp power surge is not ruled out, in which part of the capacitors of the control module or even the entire board burns out. As a result, the Samsung washing machine or other devices do not turn on, they start to freeze, and the programs go astray.

The consequences can be very serious, up to the replacement of all electronics, that is, the board with the processor. Self-repair is possible, but this requires appropriate experience. The sequence of actions is as follows:

1. If the washing machine does not turn on, it is de-energized and the back panel is removed.
2. Remove the lid and the container into which the powder is poured.
3. Unscrew each screw with which the board is fixed.
4. They take it off and take a picture, so that later they can be connected correctly.
5. Find burnt areas and replace them with new contacts.
6. Set the board in place.
7. If after that the Indesit washing machine does not turn on, the reasons must be sought in other nodes.

The device does not turn on and the indicators do not light up

When the unit does not start, and the lamps are also deactivated, this means that the mains connection is broken. The main breakdowns are:

1. Damage to the power cord - you need to carefully inspect it, make sure the integrity of the cable and insulation.
2. A broken cord plug is another reason why the washing machine does not turn on. Since it cannot be repaired, a new part should be installed.

If both the cord and plug are in order, but the unit still does not work, it is more difficult to diagnose the real cause. Therefore, it is worth contacting a specialist.

Washing does not go, the door does not lock

If the Samsung washing machine does not turn on, the cause of the malfunction may also be related to the door. It does not close tightly, which is why the washing process does not go. Therefore, you need to do several things:

1. Inspect the hinges, if necessary, tighten the screws that hold the door. Then the structure will take the correct position, and the lock can be closed until it clicks.
2. Check the tongue, tighten the screws that hold it. If it breaks, it is necessary to completely replace the part. The door is removed, a new spare part is installed and put in place.
3. You can also explain why the washing machine does not turn on with a broken device blocking the hatch. To replace, you need to remove the screws, and then the UBL itself. Then it needs to be tested with a multimeter. If there is no resistance, a new part should be installed.
4. The electronic module has broken down - in this case, the lock indicator lights up on the screen, and the door closes, but the wash does not go. This is observed if there were power surges in the network or water got on the board. That's why the washing machine won't turn on.

Failure Prevention

When the washing machine does not turn on, the reasons relate to different parts. In the simplest case, we are talking only about a broken cord or plug, although it may also be that the board with the processor burned out. In any case, if the Indesit machine does not turn on or a device of a different brand breaks down, repairs are required, often expensive.

To avoid it, it is recommended to follow a few simple rules:

1. If you have to wash all day, between cycles you need to leave time to rest for at least 2 hours.
2. Use only high-quality powders to avoid damage to the heating element.
3. Sometimes the Indesit washing machine does not turn on due to clogging. Therefore, the mesh, pump and filters should be cleaned periodically.
4. Sometimes users are in a hurry to put clothes on and start the washing process. Foreign things get into the tank, and then the Samsung washing machine does not turn on. It is recommended to carefully monitor pockets and always avoid such situations.
5. If voltage drops are observed, the Indesit washing machine also does not start. If it is not equipped with its own stabilizer, you must purchase and connect it. Then all electrical appliances will be insured against drops.

In general, we can say that for prevention it is important to follow the instructions. When the Indesit washing machine does not turn on, finding the cause is not always easy. If you are not sure, it is better to contact a specialist. He will tell you exactly why the washing machine does not start, and what needs to be done in a particular case.