Which inlet hose for a washing machine is better to choose? Service life and repair methods of hoses - Setafi

click fraud protection

When purchasing a new device, users do not always wonder which inlet hose is better for the washing machine, since it is included in the kit, and additionally purchase an accessory not necessary. But in the basic configuration, parts may not be of very high quality. Moreover, the hose gradually wears out, so the question arises of buying a new one. To make the right choice, you need to study several criteria, which are described in this article.

The content of the article

  • Hose types
  • Main selection criteria
  • Service life and repair methods

Hose types

Even such a simple item as a hose can be of several types:

  1. Simple - they are a rubber pipe. It is cheaper than everyone else, but does not differ in high quality.
  2. Reinforced - equipped with a reinforced outer layer made of stainless steel. It also has a nylon braid, so the reliability is noticeably higher, which is reflected in the speed.
  3. A double tube with an additional valve or knob with a special powder mixture inside. This is the most reliable part, which practically eliminates the possibility of leakage. Protection is provided by automatic closing of the valve or swelling of powder particles due to incoming water.
    instagram viewer
Washing machine hose

Another classification is related to the ability to adjust the length. According to this parameter, there are also 3 types:

  1. Hoses with a fixed length - usually 2-3 m, maximum 5 m.
  2. Corrugated products that can be stretched to the required length. A very convenient option, especially if the washing machine is relatively far from the water supply.
  3. Coiled tubes are a rather rare type of hose that allows you to connect the unit even at a great distance (maximum distance 10 m).

Main selection criteria

First of all, you need to decide on the type of accessory, then understand what thread is on the hose of the washing machine. By default, it is 3/4 inch, which corresponds to a shut-off valve. But even if they have different sizes, you can purchase an adapter so as not to buy a new hose.

Here are a few more options to consider:

  1. Length - usually 2-3 m is quite enough. First you need to assess how far from the water supply the washing machine is or will be. The size of the inlet hose for a washing machine can be different, usually within 5 m, which is quite sufficient in almost all cases.
  2. The maximum internal pressure that the hose walls can withstand is indicated on the marking. For an apartment, 20 Bar is enough, and for a private house - 30-40 Bar. It is better to take with a margin, because it is possible to accurately determine the maximum pressure only in practice. It is worth remembering that the length of the inlet hose of the washing machine and the pressure indicator are in no way connected.
  3. The maximum water temperature that the product material can withstand. Usually, manufacturers guarantee performance even at 100 degrees, that is, the boiling point. Although if the accessory is cheap and made of low-quality materials, this can be doubted.

Service life and repair methods

Even the highest quality part can wear out, so over time the question arises of how to change the inlet hose on a washing machine. It is not difficult to deal with this, the main condition is to turn off the tap that supplies water (cold pipe).

Hose life

The sequence of actions is as follows:

  1. If the service life of the hose for the washing machine has expired (on average it is 4-5 years), you need to carefully inspect it and make sure it needs to be replaced.
  2. Purchase a new product of the same type. It is important that it has sealing gaskets.
  3. Find a tip in the shape of the letter L (right angle) on the side where the product is connected to the washer.
  4. Disconnect the old part.
  5. Screw in a new one - it will take a few minutes to install the inlet hose of the washing machine.
  6. Then mount it in the pipe.
  7. Make sure that it is not twisted or kinked anywhere.
  8. Open the water supply tap.
  9. Make sure that the water flows normally, carry out a test wash.

If the product is properly installed from quality materials, the service life of the inlet hose for the washing machine will be much longer than declared by the manufacturer. During operation, you need to periodically inspect it to exclude twists. This is especially important if the machine was moved, moved to another place. If necessary, you can purchase a new accessory and then go back to the instructions on how to replace the inlet hose in the washing machine.

How does air conditioning work in an apartment? Working principle and main features - Setafi

How does air conditioning work in an apartment? Working principle and main features - SetafiHomeAppliances

prom.uaInterested in how air conditioning works? You have come to the address. Further in the article: the principle of operation of an air conditioner using the example of a split system, the main...

Read More
How to use a tonometer? How to put on the cuff of an automatic blood pressure monitor? – Setafi

How to use a tonometer? How to put on the cuff of an automatic blood pressure monitor? – SetafiHomeUncategorized

bt.rozetka.com.uaMeasuring pressure is a process that everyone must master. It doesn't matter if he knows it or not. This will come in handy when you or your family members get sick - high or low b...

Read More
TOP best 2 DIN car radios: 2021 rating of the year - Setafi

TOP best 2 DIN car radios: 2021 rating of the year - SetafiHomeElectronics

The content of the article1 Alpine IVE-W560BT-R2 Prology MPC-503 Kenwood DPX-M3100BT4 ROXIMO 4G RX-1002 2DIN5 Pioneer MVH-S610BT1 Alpine IVE-W560BT-Rsplaudio.com.uaThe first place in the top of the...

Read More
Instagram story viewer