When does de error occur on LG washing machine? What does this error mean and how to fix it? – Setafi

The dE error on an LG washing machine is one of the most common. It lights up on the screen if there is a problem closing the door. If you close it tightly until a characteristic click, but the code still appears, you need to start repairing. About what can cause such a violation, and how to eliminate it, is described in the article.

Self repair

The dE error on the washing machine appears when there is a problem with the sunroof blocking. In the simplest case, the cause is due to an improperly closed door. It needs to be opened and closed again when you hear a click. Moreover, it is better to do this at the moment when the device is already turned on (after pressing the “on” button).

On the other hand, LG also shows the dE error when the device that automatically locks the sunroof is faulty. If there is no screen, then all the indicators on the panel light up or flash simultaneously, which indicate the temperature level, washing modes and other options.

Self-repair is possible if the dE error appeared for the following reasons:

1. Tank overload - then the LG washing machine shows a dE error, but in fact the reason is not related to the door itself or the blocking device. Washing does not start due to overload - you need to remove some of the clothes and try again.
2. You need to understand what the dE error of the LG washing machine means. If after closing the door it does not disappear, you should inspect the rubber seal, that is, the cuff. It may well be that it is damaged or covered with a layer of dirt.
3. The LG machine also shows a dE error if the door itself is damaged. Its repair is possible with the appropriate skills and improvised tools.
4. Finally, if clothes are stuck between the door and the elastic, the tightness of the entire structure is broken. In this situation, it is clear what dE means on a washing machine. This code indicates that the door is not closed tightly enough. And even if before that the washing was going on, it will stop. Otherwise, water may leak out or steam may escape.

Thus, when the LG washer shows a dE error, you should first open the door and shift the laundry. If there is too much of it or some things are bulky, they certainly interfere with complete sealing. If the laundry gets stuck between the door and the cuff, this violation should also be eliminated.

If after that a dE error appears on the LG washing machine, you must press the very center of the handle or door so that it closes tightly. As a rule, this is quite enough. If this measure did not help, proceed to the repair.

When to contact a specialist

When Algie's washing machine issues a dE error, the breakdown can be more serious. It is necessary to carefully inspect the door and make sure that the sensor is intact, and there is also a magnet. In the absence of it, the device that blocks the hatch will not be able to work, so the washing process will not start.

There are other rather serious reasons when the dE code appears on the LG washing machine:

• the lock hook is broken;
• the spring or clamp that fixes the blocker has shifted;
• the electronic sensor of the device blocking the hatch has broken;
• The electronic board of the control module has failed.

When a dE1 error occurs on an LG washing machine, the recovery steps depend on which item failed:

1. If the door is skewed, does not close tightly or does not fit into the lock at all, it is necessary to tighten the hinges - they may have worn out a lot.
2. When the dE1 error appears on LG, and the washing does not start, and the door itself closes completely, the device that blocks the hatch is broken. You will need to replace the part - as a rule, this work is performed by a specialist.
3. It is useful to know what dE means on an LG washing machine depending on when the code appears. If it arose during the cycle, and the washing stopped, and a burning smell appeared, the problem is with the control module. It can be damaged due to a voltage drop in the electrical wiring or due to high humidity.
4. When the handle is not working properly, the door cannot be fully engaged with a distinctive click. In this situation, the dE error of the LG washing machine will also appear. The part is not recoverable, so it must be replaced with a new one.
5. If the hinges wear out, and even after tightening them, the situation does not change, the problem is related to wear. Then a dE error will appear on the washing machine. Since the case is running, the only solution is to replace the hinges.

Separately, it is worth considering the case when the washing machine shows a dE error due to problems with the control board. If an electronics failure is observed for the first time, you can simply turn off the unit for a few minutes, and then turn it back on. But when the reboot does not help, you need to remove the board, inspect it and, if necessary, replace the damaged contacts.

Thus, the LG washing machine gives a dE error for a variety of reasons. In the simplest situations, it is enough to shift the laundry, remove bulky items and try to close the door tightly. Although often this does not help - then repairs are required. If there is no certainty, it is recommended to invite an experienced specialist.