How to use an ax correctly

An ax is available in every home, because it is used for cutting trees, chopping firewood and other household needs. Wherein design its extremely simple. It consists of a metal nozzle with a sharply sharpened rib, which is mounted on a strong wooden handle. If necessary, the shaft can be changed.

The content of the article

  • How to chop with an ax?
    • How to cut down a tree?
    • How to cut logs?
    • Safety

How to chop with an ax?

The tool is considered an indispensable attribute of the household, especially in rural areas. In addition to the rough processing of wood, it often becomes necessary to cut down trees, shrubs and other plantations that interfere with agriculture.

The cutting process is not complicated, the main thing is to know some of the features and carefully follow the safety precautions when working with the tool.

How to cut down a tree?

If the landing is high, it is recommended to remove large branches and branches first, so that it is more convenient to work. A strong rope is tied to the top, tilting the trunk in the direction where the tree should fall.

instagram viewer

Then they make a cut with an ax at the bottom of the trunk - from the side where it will fall. On the opposite side of the trunk, a cut is made with a saw. If you plan to uproot a tree, you will need to dig in the root system with a shovel, and then chop them off with a sharp ax.

how to cut down a tree

@eng.mentorbizlist.com

How to cut logs?

First of all, a wooden stick is laid on a solid surface. For example, on a deck or a thick log. Then they make a transverse notch with an ax several times, acting on the markup.

You will have to alternate transverse direct blows with oblique ones, at an angle of about 45 degrees. During operation, the log is rotated around its own axis. Gradually, the ax deepens towards the middle and cuts it into two parts.

how to stab with an ax

@eng.mentorbizlist.com

Safety

Before starting work, check blade sharpness, and also make sure that the metal tip is firmly seated on the handle of the tool. Only then can the device be operated safely.

When chopping wood, do not try to act with one blow: it is so easy to damage the ax itself and get a kickback in the muscles. Work carefully, applying force only at the end of the swing - in contact with the log.

After chopping wood, do not put the tool in the grass: the iron will quickly rust. Better lean it against the deck or leave it inside one of the logs. In the cold season, iron becomes brittle - it is better to immediately remove it to the barn.

Cleaning a stainless steel pipe from rust before painting: how to clean it - Setafi

Cleaning a stainless steel pipe from rust before painting: how to clean it - SetafiRepairHome

Cleaning stainless steel from rust is required in cases where brown spots and other traces of corrosion are visible on the surface. They sometimes appear even on polypropylene, plastic pipes due to...

Read More
Aerated concrete and its thermal conductivity: what is the value of the coefficient - Setafi

Aerated concrete and its thermal conductivity: what is the value of the coefficient - SetafiRepairHome

The thermal conductivity of concrete is determined by the corresponding coefficient, the value of which ranges from 0.33-0.06 W / (m * K). It is recommended to consider materials with a minimum par...

Read More
TOP quadcopters with a camera: a selection of the best models, description - Setafi

TOP quadcopters with a camera: a selection of the best models, description - SetafiHomeElectronics

The content of the articleWhich brands and models of quadrocopters are the best in 2021: selection, characteristicsWhat are the technical features of the best quadrocopters: list, descriptionWhich ...

Read More