The washing machine does not turn on - what to do?

What can cause such a malfunction?

The reasons why the washing machine does not turn on may be different. You can diagnose and repair simple breakdowns at home by yourself. But sometimes problems in the operation of the washing machine can be more serious, then you cannot do without the help of a qualified specialist. The reason why the washing machine does not turn on or the washing process does not start can be a failure:

• Power supply - sockets;
• Power Cord;
• Start Button;
• Noise Filter;
• System locking the loading door;
• Control Unit or Control Module.

Checking the health of the outlet

Often there are situations that the machine does not automatically start the wash cycle, because the outlet has broken. The easiest way to check the performance of a power source is an indicator screwdriver. If such a measuring device is not at hand, you can plug in it with other electrical equipment( for example, a light bulb or charging a mobile phone).In the case when the power supply connector is in good condition, but the washing machine still refuses to start the wash, the cause should be sought in the device itself, for this a multimeter will be needed.

The power cord is damaged in the plug or wire of the

. To check for possible faults, carefully inspect the power cord and plug for any kinks and gaps. It consists of three wires, each of which is subjected to different loads, they often become the cause of failure. The serviceability of each wire should be checked with a tester. If the integrity is broken or the device has not issued the appropriate readings, the power cord must be completely replaced.

Checking the wash start button

There are two wires to the button that is responsible for starting the wash program. They need to call a multimeter. Also, with the help of a tester, the power button itself is checked in active and inactive modes. If during the diagnostics process a malfunction is detected, the part must be completely replaced.

Interference Filter( FPS): Value and Functional CheckTo protect electrical devices, in the car automatic machine provides a noise filter. In case of its malfunction, it will create an obstacle to the passage of electric current. This will be the reason why the machine does not start the washing process. To check the performance of this part, you need to diagnose the wires at the input and output, as well as the device itself using a tester. If the FPS does not work, you need to order a new filter in the service center or make a request for its replacement.

Faults to lock the door

The door of the washing door of the washing machine is not tightly closed, or the lock is broken. If the washing machine does not turn on the washing program, but the indicators are lit, the first step is to check if the loading door is properly closed and the locking system is working after attempting to start the program.

A fairly common reason why a washing machine lock does not work is a skewed door or hook on it. You can adjust the level of the door using the mounting bolts. If the problem is in fixing the hook, you must check the presence of the metal rod that holds it. During operation, it could fall out and become the reason why the machine door lock does not work.

If the tank door closes with a characteristic click, but after the washing program starts, the lock function is not activated, then there is most likely a problem with the hatch lock device( UBL).To confirm the fault, you need to ring the lock with a tester. But first you should visually inspect the castle using a flashlight. Maybe, small debris got into the hole, which does not allow the locking system to work properly.

Malfunction of the command device or the

control module. If after the diagnostic measures all the indicators remained normal, but the machine still does not start the washing program, the cause could be a failure of the control module or the command device. Replacing the electronic module is a fairly expensive repair and it is often easier to purchase a new washing machine. But there are times when it can be repaired. To do this, the performer must have experience and knowledge of electrical work. If they are not available, then one cannot do without a qualified master.

Prevention of damage to the washing machine

In most cases, the service life of the washing machine without repair can be increased by following the simple rules:

• Act according to the manufacturer's instructions for the appliance;
• For protection against voltage surges and short circuits, you can connect the washing machine only through special protective devices( RCD);
• Use the machine with the expectation of rest. If several washings are planned for the day, it is necessary to do a break between them for 2-3 hours;
• Prevent mold and other fungi in the installation site and in the machine itself. To do this, after the end of the wash, the compartment intended for laying the powder, as well as the rubber gaskets of the hatch must be wiped dry and left for several hours open the door of the loading tank;
• Use for washing only high-quality detergents. Modern powders and gels are made with the addition of special elements that prevent the formation of salts on the structural elements of the washing machine;
• At least every six months, start a preventive wash cycle on a program that provides for a high temperature regime, with the addition of anti-scale agents.

Such preventive measures will not only prevent breakdowns that lead to the fact that the washing machine does not turn on, but also save consumer financial resources spent on electricity.