How to lubricate the hair clipper?

Every self-respecting mistress has a hair clipper available to cut and trim the hairstyle of her family and friends. This tool for hair care is available for many unmarried men, as beards have recently become popular, and caring for it requires special attention. Clippers have gained popularity in everyday life and have been used far beyond beauty salons and hairdressing salons, as they are easy to handle and simple in their device. An important advantage is that its price does not bite very much, and a huge assortment allows you to choose exactly the device that will suit your requirements. But, as well as for any electromechanical device, it is necessary to monitor and service it, otherwise the machine will become unusable. In this article,how to lubricate a hair clipper.

Why do I need to lubricate the machine?

All hair clippers have an actuator in the form of two cutting surfaces or knives, which in different models have a different device and can look different. Also, in any device, an electric vibration motor is used, which provides movement of the cutting elements. It should be noted that the machines for haircuts are different in application, it is not recommended to cut hair with a hair machine because of different structure.

Lubricate the knives to ensure that they have the least friction between each other, do not heat up and at the same time gently, without jerking, cut the hairline. Recommendedto grease a clipperafter each use, having preliminary cleaned the executive body.

Cleaning and lubrication of the machine

In order to lubricate your machine, you first need to go through a few simple steps. To begin with, it is recommended to use machine oil or specialoil for the hair clipper.Usually in most machines, the oil for lubrication is included, and in this case, you should not have a problem, than lubricate the device. Next, you should clean the machine from hair and lubricate. There are several general rules for lubricating the clipper:

• first of all, after the end of the haircut, you need to clean the machine's blades from the hair left after the haircut. It is advisable to do this with a brush, which almost always comes with a machine;
• After the block of knives is cleaned, it is necessary to wipe it with a soft moistened cloth or a napkin;
• Next, a couple of drops of oil should be applied, but it is advisable not to overdo it so that it does not leak;
• then turn on the machine so that the oil is evenly distributed over the cutting surface;
• Wipe the lubricated device dry.

We recommend to carefully clean the machine of hair, so that they do not mix with oil, which can lead to an early failure of the machine. If the machine has not been cleaned for a long time, then you can use a special liquid VD-40. But you should be careful with it, take care of your eyes and avoid contact with exposed skin.

How often should the machine be lubricated?

As mentioned above, it is desirable to lubricate the machine after each use, so the professionals recommend it. Also, it depends on the quality and value of your machine. Since, in more expensive machines, the functional device is a bit more complicated and requires more thorough maintenance if you want the equipment to serve you long and well. In case you have not operated the machine for a long time, it should also be lubricated before use.

We hope that this article has helped you in the matter,how to lubricate a hair clipper. If you follow all the points described in the article, then your hair clipper will last you long and well.