The reasons for stopping the washing machine during washing
Today there is a whole list of household appliances, which is designed to facilitate the life of a modern person. Among this group of products, the washing machine occupies a special place. Its acquisition allows the owner to completely forget about the painful process of hand washing, which takes a lot of time and effort. Therefore, when this unit stops working, the sense of comfort disappears very quickly.
Content
-
1Simple solutions to the problem
- 1.1The weight of the loaded laundry exceeds the maximum allowable weight
- 1.2Wrong selection of wash mode
- 1.3Imbalance of the laundry
-
2Breakdowns leading to stopping the washing process
- 2.1Video: what to do if the drum of the washing machine does not spin
Simple solutions to the problem
The most common problem associated with the washing machine is its "hang" in the process of operation. Right during washing, the washing machine suddenly refuses to continue to carry out the duties assigned to it. There are a number of objective reasons for this phenomenon, which will require the intervention of professional masters. Only they can repair the device by repairing or replacing certain parts. However, in some cases the solution to the problem can be very simple. So, if during the washing process, the washing machine stops, this does not mean that you need to run to specialists.
Sometimes the washing machine stops in the following cases:
The weight of the loaded laundry exceeds the maximum allowable weight
At the very beginning of washing, the washing machine "freezes" and a special intelligent weight sensor (if available) is triggered. The solution to this problem is to reduce the amount of washing to the allowed level.
Wrong selection of wash mode
There are special modes without pressing and draining to wash easily crumpled, delicate things. In this case, the machine stops with water during rinsing. Solve the problem by using a forced plugging in.
Imbalance of the laundry
Often the laundry is collected by a lump in one part of the drum, which leads to a strong imbalance. The washing machine stops and does not spin, thereby preventing a strong vibration of household appliances. The owner can not understand why the process stopped. However, having opened a washing machine, the question is solved by itself. To rectify the situation, evenly distributing laundry on the drum by hand.
Breakdowns leading to stopping the washing process
If directly during washing, the washing machine refused to work, and the above solutions did not give the proper result, then, most likely, there were more serious problems.
Below are the details of the washing machine, the failure of which more often than others leads to the "hanging up" of home appliances:
- engine;
- ten, contacts;
- Hoses, filters (clogging);
- pump / pump;
- module / programmer;
- Castle.
If during washing, the washing machine suddenly hangs, it is very important to understand why this happened. Namely, which of the above-mentioned details caused the failure. Further operation of the faulty unit necessarily leads to a serious breakdown, which entails a serious waste of funds.
If in the beginning washing, washing machine suddenly hung, that is a high probability of failure of TEN. The failure of the latter leads to the impossibility of heating the water and, accordingly, to the violation of the algorithm of work of household appliances.
Also, the failure of the heater can be indicated by the stopping of the machine at the last minute of the work process. But, this "symptom" can mean problems with pomp. In the case of "hanging" the machine during spinning or rinsing, there is a high probability of problems with hoses or filters, namely their clogging.
If during the work of the household appliances a timer is frozen, then it is unequivocal to say why the stop was very difficult. In general, problems with electronics washing machine - a separate conversation. Therefore, it is necessary to trust the solution of serious problems with this unit only to highly qualified specialists.
To very common problems is the stop of the washing machine with water. In this case, you need to turn off the power of the device, close the tap. The tap is near the hose connection with the water pipe. Next, you need to drain the remaining water in the drum, for which you should use the emergency drain. The next mandatory step is to call the wizard.
Video: what to do if the drum of the washing machine does not spin
The washing machine is a very complex mechanism, which it is very difficult to understand. Therefore, if, with unstable work of home appliances, elementary attempts to solve the problem are not allowed, it is recommended to contact professionals.
.