How to connect the thermostat to an infrared heater

In modern life, when using new equipment, there is a need to optimize the equipment used for comfortable and efficient everyday use. This includes the use of appliances that help reduce energy costs, increase efficiency, and control the entire heating system of your home. An example of such devices are thermostats for infrared heaters. How to connect the thermostat to an infrared heater, as well as how to use it correctly, you will learn in our article.

Specifications and types of thermostats

So, in order to begin, in fact, the installation of equipment, you need to know and have an idea of ​​its structure and characteristics. This is necessary in order to find out as efficiently as possible the effectiveness of a particular instrument for your use.

The thermostat, as its name suggests, adjusts the room temperature. He does this by measuring the air temperature in the room, and depending on the results obtained and the settings, he already regulates the heating system. That is, if you have one or several heaters installed, it doesn’t matter who have reached a certain temperature, and then turns off, then this is the work of our thermostat. The principle of operation is simple and does not require any in-depth knowledge.

At the moment, there are two types of thermostats on the market: electronic and mechanical. They all look like small boxes, often made of plastic. There is a temperature regulator on the front, although there are models where it is located on the side. The type of device depends on the manufacturer, model and, accordingly, its price. As a rule, mechanical temperature controllers have control in the form of a wheel or buttons, and electronic ones are equipped with a touch screen or a large set of buttons, and also have a remote control.

Manufacturers recommend using mechanical thermostats only when there is always someone in the room. Electronic smarter in this regard and do not need constant monitoring.

Thermostats are connected to all modern heating devices and infrared heaters are no exception. It is about them that will be discussed in our article.

Installing a thermostat on an IR heater

Installing such equipment as a thermostat does not require much knowledge in the field of electrical engineering, but you need to know some of the points. For example, you need to find the right place to place your device, regardless of its type. It is best to install in places with low humidity, the devices do not like it very much, they can fail and eventually become unusable, especially with regard to mechanical devices, since electronic devices are more protected from external influences and sealed. Also, do not place the device near sources of heat or sunlight, for example, near a kitchen stove, heaters and in front of open windows. This is the first step in installing the thermostat for infrared heaters - the selection of the installation site.

The following is the installation itself. This process includes connecting the appliance to the mains and heater. For correct connection of all elements among themselves, an automatic relay is used, which serves as a power source for your heating device, in our case IR heater. There are several schemes that are used for the installation of thermostats, they will be provided below.

Schemes of connecting the thermostat to the heater

There are several ways to connect the thermostat to the heating system, both simple and complex, but this can be done with your own hands. So, the simplest option would be a circuit with one thermostat and one heater. The circuit is very simple: the automat has two pairs of contacts, one of them is connected directly to the thermostat. Naturally contacts are a zero and a phase, everyone familiar with electrical engineering should be clear to these values. The remaining pair of wires is already connected to the heater.

Option number two is a bit more complicated, since it implies a parallel connection of the heater through a thermostat. This method allows you to connect several heaters to the thermostat. The scheme is also quite simple, if you look into it. From the circuit breaker a pair of wires goes to the thermostat, and already from it there is a wiring of contacts to your IR heaters.

The most difficult is the connection scheme, which also uses one thermostat for several space heating devices, but differs from the second one in the connection itself. So, in order to mount this circuit, a magnetic starter is used, and the connection circuit is individual. There are also ready-made schemes, just take it and install it, but this does not guarantee you a stable system operation. This option is the most practical and common.

Conclusion

Thermostat for infrared heaters is an excellent solution for the heating system at home, office and other things. Connection is carried out both independently and with the help of the wizard. How to connect the thermostat to an infrared heater, you can find the instructions included with the device or found on the Internet. We hope our article was helpful.