When tiles are selected for decoration, first of all, most people are guided by its external data and cost. Along with this, it is also strongly recommended to take into account its operational characteristics, because it will depend on them how durable the material and your repair as a whole will be.
Given the fact that the forced dismantling requires a lot of time, as well as additional ones, and sometimes unplanned financial investments, I really want the tile to serve as much as possible longer. In fact, this material is quite resistant, it can withstand various external influences. But at the same time, almost all types of tiles are still fragile, cracks are not uncommon.
Causes of Cracks
Perhaps the most common cause of cracks on the tile is an external mechanical impact, and quite strong. It can be either a fall of some heavy object, or massive and very heavy furniture.
Cracks can also appear as a result of uneven floors or walls. Tile decoration in a house that was built less than three years ago is not recommended etc during this time, the house may still be upset, some deformation and walls and floor. And you can notice such a shrinkage just by the cracks that appeared on the tile.
Tile is one of the cheapest finishing materials, and when a large amount of work is ahead, then buyers often choose the cheapest models. As a result, having saved on the quality of the product, it is quite possible that soon you will have more impressive financial investments to eliminate this problem.
With the wrong choice of material, troubles in the form of a cracked surface are also quite possible. Be sure to consider the characteristics of the surface, it must withstand high loads.
Also keep in mind that wall and floor tiles have different performance characteristics; if wall models are used on the floor, they simply cannot withstand the load.
If the tile is cracked
Most often, a problem becomes noticeable only when it has already occurred. To fix it, it is necessary to replace the tile, because when you buy material, it is advisable to do this with a small margin, especially when it comes to tile.
-
Where a cheap substandard corrugated board is useful in construction
-
What are the disadvantages of expanded clay as a heater
-
What is the difficulty of gluing fiberboard to the walls
-
What are the disadvantages of a polycarbonate roof
-
Which foam block is not suitable for building a house
-
Which windows are better: plastic or wooden
-
Why is marmoleum the best flooring?
-
Why penetrating waterproofing the basement from the inside is not done
-
Than latex foam is better than other construction foam
-
In which cases it is impossible to add waste oil to bitumen
-
Why you should not replace the ondulin brand horse with a metal one
-
What to choose - pressed fittings or crimp fittings
New publications are published daily on our channel in Yandex. Zen
Go to Yandex. Zen
