Content
- 0.1 Treatment
- 0.2 Unique metrics
-
1 Sound insulation performance
- 1.1 Smooth surface
- 1.2 Environmental friendliness
At the moment, among all existing building materials that are supplied by various manufacturers, cellular concrete is especially popular. It is used for both high-rise and low-rise construction. This is because it is characterized by uniform porosity, which significantly increases its strength, but at the same time minimizes the total weight. Aerated concrete is used to make blocks. At the same time, specialists use various techniques.
Autoclaved concrete stands out among a wide range. All because it has a huge number of advantages.
Treatment
Due to the fact that the blocks have a peculiar structure, they can be easily cut or drilled if necessary. Such an opportunity allows you to easily form a variety of shapes to decorate the building. Due to the fact that the blocks are large enough, but at the same time the minimum weight, construction can be carried out without any problems.
Unique metrics
The blocks have a peculiar porous structure, which allows to optimize the thermal conductivity. In this case, the blocks can tolerate a fairly high level of humidity, as well as temperature fluctuations, without any special problems. No less important is the fact that the blocks can withstand a huge number of defrost-freeze cycles.
Sound insulation performance
Blocks consist of a huge number of pores, which differ in small diameter. This is what makes it possible to significantly reduce the noise index. But at the same time, during the installation process, some rules must be observed. All this will not only allow you to get a high-quality result, but also increase the main indicators.
Smooth surface
The presence of such an advantage makes it possible to carry out the installation of these blocks without any particular problems. In addition, in the future it will be possible to finish with various materials. So, often enough, such coatings as decorative plaster, siding and plastic panels are used.
Environmental friendliness
If we consider the main characteristics of this material, they are very similar to those of wood. But at the same time, the process of caring for them is simpler. Subsequently, mold or rot does not appear on them. Undoubtedly, some rules set by manufacturers must be observed.
-
Where a cheap substandard corrugated board is useful in construction
-
What are the disadvantages of expanded clay as a heater
-
What is the difficulty of gluing fiberboard to the walls
-
What are the disadvantages of a polycarbonate roof
-
Which foam block is not suitable for building a house
-
Which windows are better: plastic or wooden
-
Why is marmoleum the best flooring?
-
Why penetrating waterproofing the basement from the inside is not done
-
Than latex foam is better than other construction foam
-
In which cases it is impossible to add waste oil to bitumen
-
Why you should not replace the ondulin brand horse with a metal one
-
What to choose - pressed fittings or crimp fittings
New publications are published daily on our channel in Yandex. Zen
Go to Yandex. Zen
