The most common mistakes in organizing lighting

Content

  • 1 Only one light source
  • 2 Too much light
  • 3 Wrong power selection
  • 4 The abundance of recessed fixtures
  • 5 Lack of dimmers
  • 6 Ill-considered installation of switches

An important, albeit a very difficult task, is the proper planning of lighting. Mistakes in this matter are made quite a lot. You need to consider the placement and type of fixtures, the desired intensity and much more. What are the most common flaws?

/

Only one light source

Proper lighting involves placing several lighting fixtures at different heights. You can’t rely on only one chandelier in any case. If you use several different light sources, you can create the necessary accents and properly zoning the room.

/

Combinations of types of lighting can be varied, but the easiest way is to create a combination of the main and accent lights. One light source in small rooms creates extra shadows.

/

Too much light

Very bright lamps strain people and deprive them of a feeling of comfort. In rooms with excessively strong light, a person feels as if on stage. Eyes very quickly and very tired. Excessive brightness must be smoothed. For this purpose, you can use lampshades or special dimmers.

instagram viewer
srcset = " https://folksland.net/wp-content/uploads/2018/09/oshibka00.jpg

Wrong power selection

A certain power of light sources is recommended for each room. For the dining room, for example, it is worth buying lamps of sixty watts, as the blinding bright light will interfere with meals. In the living room you can install more powerful light sources - from seventy-five to one hundred watts. Overhead lighting in the bathroom - seventy-five watts, side - sixty watts.

/

The abundance of recessed fixtures

Popular built-in lamps must be used competently. The ceiling will resemble a holey cheese if there are too many of them. Such types of lighting fixtures are more suitable for pantries and other small utility rooms, as in living rooms they look too flat and do not give the right amount of light.

/

Lack of dimmers

The brightness of the lamps can be adjusted if there are dimmers. The atmosphere in the room with their help can be adjusted according to current needs. In addition, for most people, the issue of saving electricity is very relevant. In this, dimmers can also be indispensable assistants.

/

Ill-considered installation of switches

Switches should be separated from the floor by approximately ninety centimeters. From the entrance opening - at least five centimeters. It is not necessary to connect all light sources to one switch, as this will exclude the possibility of planning lighting. It is also worthwhile to provide several dimmers, so that you can adjust each lamp.

/
  • Why it is not recommended to build a hollow brick houseWhy it is not recommended to build a hollow brick house
  • Why is it important to know the weight of the brick before constructionWhy is it important to know the weight of the brick before construction
  • Than cellular polycarbonate is better than monolithicThan cellular polycarbonate is better than monolithic
  • What type of corrugated board is the most common for roofingWhat type of corrugated board is the most common for roofing
  • Where a cheap substandard corrugated board is useful in constructionWhere a cheap substandard corrugated board is useful in construction
  • Typical errors in the installation of wall panels from corrugated boardTypical errors in the installation of wall panels from corrugated board
  • Embossed tile: what is worth knowing before purchase?Embossed tile: what is worth knowing before purchase?
  • Popular materials for constructionPopular materials for construction
  • What is the advantage of building houses from wood concrete slabsWhat is the advantage of building houses from wood concrete slabs
  • Facing tile: types and characteristicsFacing tile: types and characteristics
  • Gutter systems: types, materials, characteristicsGutter systems: types, materials, characteristics
  • Why you should not use expanded clay as a heaterWhy you should not use expanded clay as a heater

New publications are published daily on our channel in Yandex. Zen

Go to Yandex. Zen/
Top most unsuccessful door handles

Top most unsuccessful door handlesMaterials

Content 1 Knob Handles 2 Hollow handles 3 Plastic handles 4 Wooden handles 5 Glass pens Door handles are not just a stylish accessory, but also a functional element on which reliable fixing of...

Read More
Top building materials that should not be touched with open hands

Top building materials that should not be touched with open handsMaterials

Content 1 Slate 2 Concrete 3 Drywall 4 Mineral wool 5 Stucco mixes 6 Paint and varnish mixes When purchasing building materials in Russia, it is customary to pay attention to quality, price an...

Read More
Pipes that may burst due to frost

Pipes that may burst due to frostMaterials

Content 1 About Materials 1.1 Low pressure polyethylene pipes 1.2 Cast iron or steel pipes 2 What pipes are recommended to be used The laying of an external pipeline is a responsible matter...

Read More