Scope of dry construction mixes

Dry building mixes are now very popular because they save time and allow builders to perform certain types of work much faster and better.

/

Now in construction stores you can find a huge number of various construction dry mixes, sold in bags and bags. From the name itself it becomes clear that this product is a mixture of various components that, when combined with water and thorough mixing form a special material that is used in the construction industry for a wide variety of goals.

/

What are dry mixes?

They can vary in several ways. If we talk about the component that affects the viscosity, it can be dry mixes:

  • Calcareous;
  • Gypsum;
  • Cement;
  • Polymer;
  • Complicated.
/

They also differ in the maximum average particle size and are divided into:

  • Coarse-grained;
  • Finely dispersed.
/

Features of the composition are selected based on the features of construction work.

In what areas are they used?

Building mixtures differ in their purpose, that is, the scope. They can be used for the following types of work:

instagram viewer
  • Assembly;
  • Plastering;
  • Putty;
  • Waterproofing;
  • Heat insulating.
/

In addition, they are used as self-leveling mixes for screed, as an adhesive for surface finishing with certain types of materials, and also as a protective coating.

/

It becomes clear that the scope of such materials is different. Of course, this is not about some unique mixture that is used everywhere. Depending on the purpose, the composition may vary significantly. Those intended for installation are used, for example, to level the surface of walls and ceilings, for masonry walls, as well as partitions made of materials such as bricks, and in order to fill cracks.

/

Plaster mixes can be used for wall decoration, including decorative. Putty mixtures are needed in order to gloss over irregularities, to level the walls before finishing. Waterproofing mixtures can be used both inside and outside objects. Their main goal is partial or complete waterproofing. Often they are used for internal and external protection of basement floors, walls in cellars, etc.

/

Thermal insulation mixtures are required to improve thermal insulation properties.

Primer mixes help increase adhesion between other mixes used in construction or repair. Such mixtures are used when pouring and leveling floors, if the main draft version is uneven, little time for standard screed or standard screed does not allow weather, temperature conditions. In addition, the use of self-leveling mixtures really saves time, so how they dry quickly, and after 8-10 hours you can start laying the main floor coverings. From the name itself it becomes clear that adhesive mixtures are used for surface treatment, if on them some other materials will be glued, for example, ceramic, clinker or earthenware tiles and so on Further. Also, such mixtures are necessary in order to create a protective layer on the surface of a particular coating so that it can withstand climatic and other loads.

/
  • Why plaster can not be replaced with puttyWhy plaster can not be replaced with putty
  • Why is mineral wool dangerous to health?Why is mineral wool dangerous to health?
  • What facade for the house will be the warmestWhat facade for the house will be the warmest
  • What material is better to replace drywallWhat material is better to replace drywall
  • Liquid wallpaper: advantages, application technologyLiquid wallpaper: advantages, application technology
  • Where you can not apply glazing from soft PVC sheetsWhere you can not apply glazing from soft PVC sheets
  • How to choose a paint for the facadeHow to choose a paint for the facade
  • What type of sandwich panels is the bestWhat type of sandwich panels is the best
  • What is the important advantage of an electric underfloor heatingWhat is the important advantage of an electric underfloor heating
  • Why acrylic plaster is better than other coatingsWhy acrylic plaster is better than other coatings
  • What to choose - pressed fittings or crimp fittingsWhat to choose - pressed fittings or crimp fittings
  • Materials for external wall decoration: varieties and characteristicsMaterials for external wall decoration: varieties and characteristics

New publications are published daily on our channel in Yandex. Zen

Go to Yandex. Zen/
What watering can to choose for a shower: types, materials

What watering can to choose for a shower: types, materialsMaterials

Content 1 Plastic 2 Metal 3 Metal plastic 4 Stone or glass made of quartz 5 Pay attention to the form 6 Square as well as rectangular shapes 7 Triangular Take a shower and cleanse your body - ...

Read More
What furniture to choose in 2019

What furniture to choose in 2019Materials

Content 1 What will be in trend 2 Italian furniture - one love 3 Furniture online store - what to bet on? What do you think determines the comfort of your home? Of course, this is a combinat...

Read More
What finishes for low ceilings are better not to use

What finishes for low ceilings are better not to useMaterials

When the repair begins at home, apartment or office, the customer is faced with a huge variety of types of surface finishes, among which he needs to make the right choice. The ceiling is no except...

Read More