Making repairs in the bathroom, many people are trying to save money, both on decoration and on plumbing. If in the first option it is still possible to use cheaper materials, then with the second paragraph, everything is much stricter. Experts strongly do not recommend saving on plumbing. And there are a number of reasons for this. Let's consider them in more detail.
The most important thing to note is that in no case do not save on the toilet, faucets and taps. Ask why, but everything is very simply explained.
When buying cheap faucets, you run the risk of running into Chinese fakes. They are not able to work long. Saving once, you will constantly spend money on the purchase of new cranes every two three months.
A similar situation is with taps that are installed on the riser and in some other places of the control shut-off of the water supply in the water supply system. Only here the risk is much larger.
If the mixer starts to flow, then all the water will go into the sewer. But with a leakage of the stopcock, everything will fall to the floor. In a serious accident, you can flood not only your apartment, but also the neighbors below. Having saved once, in the future, you will have to pay tens of times more. It is better to put an expensive high-quality crane and forget about its existence for 5-10 years.
About the toilet, you can say about the same thing. Cheap models are of low quality, both material and internal functionality. Like Chinese faucets, the inside of the tank very quickly becomes unusable. In many respects, it depends on hard water, but the low quality of parts also plays a negative role. It will have to be replaced almost every six months.
In addition to plumbing, do not lose sight of communications. Namely, inlets and flange connections. They are also recommended to be purchased from trusted manufacturers and of good quality. Otherwise, your expensive plumbing will be a waste of money. Since the risk of leaks, in this case, will be quite large. All your precautions and the desire to carry out repairs efficiently, using expensive materials and plumbing, will be absolutely useless.
A little advice, do not immediately run and get the most expensive plumbing. Pay attention to models with an average cost. They are often not inferior to their expensive counterparts in quality. The main thing is that the manufacturer is reliable and time-tested.
-
Why it is not recommended to build a hollow brick house
-
Why is it important to know the weight of the brick before construction
-
Than cellular polycarbonate is better than monolithic
-
What type of corrugated board is the most common for roofing
-
Where a cheap substandard corrugated board is useful in construction
-
Typical errors in the installation of wall panels from corrugated board
-
Embossed tile: what is worth knowing before purchase?
-
Popular materials for construction
-
What is the advantage of building houses from wood concrete slabs
-
Facing tile: types and characteristics
-
Gutter systems: types, materials, characteristics
-
Why you should not use expanded clay as a heater
New publications are published daily on our channel in Yandex. Zen
Go to Yandex. Zen
