Porcelain tile is a material that has a large number of advantages, it is used for flooring in the kitchen, hallway, in the garage. However, many are interested in the question of how to choose it correctly, especially given the numerous offers from various manufacturers.
Types of Porcelain Tile
Before making a purchase of this material in a hardware store, you should choose the type of coating, and it will depend, first of all, on the type of surface.
Polished products look very beautiful, but have insufficient hardness, their surface can slip, and they also slightly absorb water. Matte tiles have affordable prices and high hardness, while products coated with glaze, have a lower degree of resistance to mechanical damage, but it looks very attractive.
For garages and other rooms in which a heavy load is possible, it is best to use technical tiles. Seamless products, or as they are also called rectified, allow you to create the effect of a monolithic coating.
How to choose
In addition to what should be taken into account in which room porcelain stoneware will be used, the characteristics of the material must also be taken into account. They differ from each other in strength, frost resistance, fire resistance and wear resistance.
For sure, no one will forget about the aesthetic side, because it is this factor that is most often taken into account in the first place. Tiles are produced not only in different colors, but you can still be partially painted, have streaks or are made of marble, or other imitation. One of the most popular drawings is imitation wood, including aged.
The shape of the tiles can be very different, most often it is a square or rectangle with different sides, width can be from 20 to 60 cm, there are smaller sizes, they are usually used for decorating. Rectangular porcelain stoneware is most popular.
When buying, be sure to pay attention to the quality of the tiles, it is enough to carefully consider the reverse side, if there there are irregularities, this indicates violations during production, which means that such material will have a lower quality. Holes are allowed, but they must be even and neat.
-
Where a cheap substandard corrugated board is useful in construction
-
What are the disadvantages of expanded clay as a heater
-
What is the difficulty of gluing fiberboard to the walls
-
What are the disadvantages of a polycarbonate roof
-
Which foam block is not suitable for building a house
-
Which windows are better: plastic or wooden
-
Why is marmoleum the best flooring?
-
Why penetrating waterproofing the basement from the inside is not done
-
Than latex foam is better than other construction foam
-
In which cases it is impossible to add waste oil to bitumen
-
Why you should not replace the ondulin brand horse with a metal one
-
What to choose - pressed fittings or crimp fittings
New publications are published daily on our channel in Yandex. Zen
Go to Yandex. Zen
