The correct insertion of hinges into the kitchen facades allows the furniture installed here to function normally. Indeed, the doors of various cabinets mounted here, thanks to these elements, can easily be opened and closed if necessary.
Hinges should be selected for the specific type of swing door leaf, taking into account its dimension and the material from which it is made. Also, it is definitely worth considering:
- The degree of fixation of the doors.
- Calculate the maximum angle when opening them.
- In order not to have any irregularities and distortions in the original design.
- Try to carry out the installation of the finishing element in such a way that no creak is produced during its operation.
In order to learn how to successfully work with kitchen facade hinges, it is important to deal with their main varieties. They are divided into:
- waybills - differ in that the angle formed between the side of the box and the facade itself is 90 degrees. In the open state, these canvases give a similar indicator at the level of 110 degrees;
- half-laid - half overlap the side of the box, and the corner of the loop itself is completely closed;
- embedded - have a certain bend falling on their base;
- corner - will be in demand for installation on boxes of an angular view;
- card - are mounted on a special hinge.
To make a professional insert of similar parts, it is important to clearly carry out preliminary measurements on the door itself. In this case, holes are outlined for subsequent drilling with an ordinary pencil. The diameter of each drilled hole should be about 35 mm with a depth of 12 mm. In doing so, make sure that the drill bit goes right through the base.
The door should also be brought to the wall of the box from its lateral part and mark the places for the arrangement of fasteners. In this case, the main strip should be left at a distance of 1.5 to 2 mm between the case itself and the door leaf. After all this, you need to tighten the adjustable screws and self-tapping screws at hand.
If this happens, the hinges from their nests after installation fall out through, then first they must be carefully removed, and then try to expand the conditional hole. For these purposes, it is enough to grease a wooden dowel with special carpentry glue, and then re-drive it into the hole obtained.
-
How to make faux marble easily
-
The main features of the design of the bedroom in high-tech style
-
The use of coin boxes in trade and advertising
-
What you need to know about interior doors
-
Mistakes when choosing a cooker hood
-
How to easily remove old wallpapers
-
What curtains to choose for the living room: types and colors
-
Carpet directly on the screed: why is it wrong
-
Interior of a room without windows: design options
-
Furniture scratch resistant animals
-
Intelligent lighting system as part of Smart Home
-
What can not be cleaned furniture
New publications are published daily on our channel in Yandex. Zen
Go to Yandex. Zen
