Sewerage installation is a responsible task, which first of all requires a competent approach, and this is absolutely nothing complicated. In addition, the modern market has all the connecting elements that greatly simplify the workflow.
Recently, interest in PVC products has been growing, in addition to this it is worth highlighting:
- Polyethylene.
- Butylene.
- Polypropylene.
During the installation process it is extremely important to approach with every responsibility every detail.
Tilt angle
It is important that the system works autonomously, that is, you need to create an angle at which everything will descend by gravity. This principle is suitable for absolutely any room, it can be both an apartment and a private house. As for the horizontal bends, they are often installed only after preliminary preparation, that is, after the vertical sections are firmly fixed.
The riser, as a rule, has the largest diameter in comparison with other pipelines. If we talk directly about the connection, then this is done using tees, they are also fittings.
How to determine the angle of inclination
It is important to correctly set the angle of the pipe, the operation of the entire system depends on this. At the moment, there are certain standards for the slope of the pipeline from various equipment and plumbing equipment. It is better to provide for the installation in addition to the corner in such a way as to minimize angles and sharp turns. Based on the SNIP, it can be understood that the movement should move within 0.7 to 1 millisecond, that is, it is important to ensure an appropriate angle of inclination. Otherwise, there is a possibility that soon there will be a blockage.
If we talk directly about connecting the corners, then today no one has any problems, as the manufacturer offers oblique tees and semi-bends, where the degree varies from 30 to 45 degrees. This not only facilitates the installation process, but also prevents blockages.
How to install the fitting?
- In the assembly process using several shaped parts, the connection is mandatory fixed with clamps.
- The horizontal part of the plastic pipeline is fastened with clamps as well as suspensions, or additional means for fastening.
As you can see, the work is really simple, so there is no need to contact specialists, you can do it yourself.
-
How to glue wallpaper with fit in the corners of the walls of the apartment
-
Are wooden houses practical for living
-
The biggest mistakes when working with a jigsaw
-
A wall shines through the pasted wallpaper: solutions to the problem
-
Features of the interior of the studio apartment
-
What you need to know when decorating in an English style?
-
Decorative crafts for the house from old clothes
-
What paint is not suitable for the bathroom and why
-
Original ideas for arranging garden paths
-
Which ceilings are very dusty
-
Why do I need a primer when wallpapering?
-
Where is it better to abandon the use of perforated sheet
New publications are published daily on our channel in Yandex. Zen
Go to Yandex. Zen
