How to do without a purchased cement mortar remover

After the completion of repairs or other construction works, often on the tool and surfaces it is found that dry cement that has not been cleaned off in time, requiring delicate removal. It is quite difficult to do this, because the hardened cement mortar with a tight grip eats up on any surface.

There are various ways to remove cement mortar using home remedies, without resorting to purchased products, these are the main ones:

Cement Mortar Removal

Since the tile material is delicate, it is impossible to use rough impacts, be it the use of a nail, putty knife, hammer and other improvised tools that immediately ruin the appearance.

The first way is to remove the cement using a toilet scale remover. Having completely saturated the rag in this product, it must be applied to the stained surface for a couple of days, periodically moisturizing and not allowing it to dry, after which it can be brushed off.

The second way, if the cement has not yet completely set, is to use household salt, which is applied to moistened surface of the tile and wait until the salt begins to corrode the cement, after which the cement mortar is easily removed with a brush.

The third method of cleaning is the use of a soft brush-nozzle for a grinder or drill at the smallest speed and power.

Cement mortar removal from glass

The first method involves rubbing the glass surface with a rag soaked in water, the temperature of which is above room temperature, after which it is necessary to clean the cement with a scraper or improvised brushes.

In the second method, an ordinary blade can help, which must be carefully so as not to scratch the glass, clean off the cement mortar, and then wash the surface under running water.

In the third method, use table vinegar. It must be applied to the cement mortar, wait until the acid begins to soften it, and then clean off the remains with a brush.

Removing cement from a brick

It is possible to remove cement mortar from a brick by resorting to one of the methods: mechanical and chemical. In the first case, you will need brushes, a hammer and other tools, in the second - acid or special solvents.

The first method is to clean the brick from pieces of cement with a metal brush, chisel and hammer. It is important at the beginning of mechanical cleaning to completely wet the entire surface with water. At the last stage, when there are no large spots of cement on the brick, cleaning can be done with sandpaper.

The second way is to use a mixture of sunflower oil and brick chips, which applied to the surface of the brick and wait for complete drying, then clean off using a hard brushes.

The third method is the use of hydrochloric acid. First, it is necessary to moisten the entire surface with plenty of water, and then wipe the contaminated areas with a sponge soaked in an acid solution.

Whatever method of cleaning various surfaces of cement mortar you choose, it is always necessary remember to observe the safety and protection rules for the face and body with the help of special clothing, gloves, glasses and masks.