To make an impromptu doorbell, you will need an old push-button telephone. Such a domestic invention has many advantages over a normal call, which are not obvious at first glance. A home-made device will allow you to set the desired volume, melody and more.
Training
To make a call you will need a push-button telephone with an mp3 player, a soldering iron with flux and solder, copper wires, screwdrivers (flat and cross), second glue, insulation (electrical tape or thermotubes), stationery knife, scissors.
Process
First you need to disassemble the phone, pull out the battery, unscrew all the fasteners and remove the latches. All manipulations are carried out with a flat screwdriver. The mp3 button of the player responsible for playback and pauses is removed so that you can get to her contacts.
Thin wiring is soldered to the mp3 contacts. And the bases of the wires are attached to the chip for a second glue. The work is complicated, everything needs to be fixed carefully and slowly, since the area of soldering is very small.
If there was no play button in the selected phone model, you can use the contact on the chip from the “ok” button. If you managed to solder the wires to the contacts, the phone is going back: the screws are tightened, the latches and the case are put in place. Wires are brought out.
After you need to turn on the phone, go into the player and select the desired sound. In the settings, you must turn off the repetition of the melody, otherwise when you try to ring the doorbell, the phone will play a sound until the battery dies.
Next, you need to pick up a double wire of the required length to conduct it from the call button to the phone. And choose the key itself, which can be borrowed from the old call. Now the wire connects to the button and stretches to the phone. The wires are twisted together and insulated with heat-shrinkable caps.
There is a convenient location for the phone: a shelf or a jamb above the door onto which the makeshift call is fixed with duct tape.
-
A quick way to install posts
-
DIY plastic bottle tubes
-
3 easy ways to make a finnish candle
-
How to get rid of the gaps between the bathroom and the wall
-
Without which tool it will not work to make a hole in polycarbonate
-
Options for protecting pipes from freezing in a country house
-
What is the best waterproofing of a bathroom under a tile?
-
What material is suitable for painting OSB plates on the facade
-
Creative crafts from plastic bottles
-
How to modify a cordless screwdriver for network operation
-
Simple and versatile door alarm
-
Homemade motorcycle bike
New publications are published daily on our channel in Yandex. Zen
Go to Yandex. Zen
