How to clean a washing machine: vinegar, soda and other methods

Over time, various impurities are deposited on the drum of the washing machine, scale accumulates on the tenh. Such formations not only worsen the efficiency of the device, but can also lead to its early breakdown. From the article you will learn how to clean the washing machine from various types of pollution.

Why do I need to clean the washer

A household appliance should produce clean items at the outlet, but the working surfaces of this appliance are not always sterile. As a result of prolonged use, dirt accumulates on the drum and side walls of the device, which is separated from the clothes during washing. If you look closely, black spots can be seen at the joints of the drum, as well as on the sealing gum. Dark spots are not dirt, but developing fungal colonies.

In addition to the drum, deposits also appear on the heating elements, which are literally overgrown with salt deposits. If you do not take any action, then soon an unpleasant smell will come from the washer, in the future it will penetrate into clean things left in the typewriter for the night. The lack of necessary preventive measures can lead to damage to the device, therefore it is better to clean it in time washing machine with citric acid and soda than buying tena or calling a master to repair an expensive equipment.

Dirt, deposits and other accumulations appear on the surface of the washer for the following reasons:

• excessive saturation of tap water with minerals;
• the use of low-quality powders or other types of detergents;
• violation of the rules for operating the washing machine.

After the appearance of an unpleasant odor or the detection of traces of fungus on the drum, proceed immediately. To clean the internal surfaces of contaminants, use a kitchen sponge and warm water with chemical detergents.

How to remove scale in the washing machine from the heater and internal elements

If the washing machine is improperly maintained and the preventive measures are not taken, the heater may break. A broken heater blocks the operation of the household appliance. It is not possible to restart the wash cycle. TEN constantly comes into contact with water. When the liquid is heated, scale from metal salts forms on the surfaces of this element. The chemical agent “Kalgon” or a special filter installed in the plumbing system will help to partially get rid of such accumulations.

Improvised means

To remove scale in the washing machine, improvised means can be used that are found in the kitchen of any hostess. Citric acid is considered one of these substances. The powder is poured into a special compartment, and the device is turned on in water heating mode. Upon contact with surfaces, citric acid cleans the heater and drum from scale and stable limescale.

It is not recommended to combine cleaning the inside of a household appliance with washing clothes. A solution of citric acid or other improvised products, such as vinegar and soda, can cause permanent damage to tissues. The amount of powder is calculated by the capacity of the drum, 25-30 grams of citric acid is used for each kilogram of clothing.

How to clean a washing machine with citric acid

If there is a need to clean the washing machine with citric acid from scale, then the following operations are necessary. One part of the powder is poured into the hopper, the second in the container with the drum. Next, start the washing machine in the maximum heating mode. The device is turned off from the outlet in the middle of the cycle at night. The next morning, the water is drained and the rubber seal and drain hose are checked for large particles.

How to descale vinegar with a washing machine

Above, you learned how to clean the washing machine with citric acid, but this is not the only available means. A good effect can be achieved by using ordinary table vinegar. 1 or 2 cups of this product is poured into a detergent tank. On the household appliance, a special mode is selected with a high temperature for heating water, pre-soaking and additional washing.

After washing the washing machine with vinegar, rinse must be switched on. This additional procedure allows you to completely remove the unpleasant odor from the household appliance.

How to clean a washing machine with soda

Ordinary soda allows you to remove any dirt on the inside of the washer. The work is carried out in the following sequence:

• The contents of the pack are divided into two equal parts, one of them is poured into the drum, and the second into the detergent tank. The machine is turned on for a fast washing mode with the maximum allowable temperature for heating the water.
•  For external cleaning of the surfaces of the device, the following solution is used. In a liter of pure water, a little dishwashing gel and 100 grams of soda are dissolved. The paste is applied to contaminated places and rubbed with a toothbrush, after some time, washed off with clean water.

A good effect can be achieved when cleaning the washing machine with vinegar and soda. To prepare a working solution, 100 grams of soda is mixed with 100 milliliters of water and placed in a powder tank. 1 glass of vinegar is poured into the drum and the device is turned on in any available mode with a maximum temperature of water heating.

Special descaling agents for washing machines

If during washing the washing machine the machine with citric acid could not achieve the desired effect, you can use special chemicals to clean the surfaces. These drugs include:

1. The products of the German manufacturer topperr 3004 are ideal for washing machines and dishwashers Bosh. This tool removes scale and other impurities well.
2. Schnell entkalker (200 grams per pack) works well with persistent calcareous deposits.
3. German-made Magic power is made in the form of a powder or gel. This tool helps to cope with stable deposits on the heating element or drum of a household appliance.
4. Beckmann is a multi-purpose chemical that helps break down limescale and scale and also helps get rid of bad smell.
5. Dr. TEN domestic production is available in powder form. This inexpensive preparation allows you to effectively remove scale and other deposits in various household appliances.

Some chemicals, for example, the same "Kalgon" does not protect the washing machine from scale formation. This tool reduces the concentration of metal salts in water.

Manual method

To prevent the washing of the washing machine with your own hands, it is necessary to inspect the heating element. During continuous operation, a thick coating layer forms on the heating element of the household appliance, which will be difficult to remove with the help of chemicals or improvised means - it is better to chip manually.

It is not recommended to use a knife to destroy the structure of the stone, this tool can damage the surface of the heating element. It is better to remove the heater from the washer and soak it in a solution of professional cleaning agent. In addition, you can clean the washing machine from scale with vinegar or a solution of citric acid.

All operations are performed in the following sequence:

• disconnect the wires from the terminals, remove the heater;
• we wash the heating element under a strong pressure of water, which will remove a fresh coating;
• we make a concentrated solution of a cleaning agent;
•  for convenience, place the item in a cropped plastic bottle filled with liquid.
• shake the solution of active substances and leave to settle overnight.
• In the morning we rinse the heating element with a jet of cold water and clean its surface with a soft cloth, during this time all deposits should be completely destroyed.

If there is a need for cleaning the heater, you can conduct a visual inspection of the surface of the drum. You may have to disassemble the washer and remove plaque and scale from this part of the household appliance.

Comprehensive cleaning of the washing machine

Scale is not the only problem that can occur if the washing machine is not used properly. On the inner walls of the household appliance, dirt is often deposited, mold and an unpleasant odor appear. To improve the quality of washing, you must always maintain cleanliness in the device, as well as carry out disinfection of the washing machine at home.

How to clean the drum of a washing machine

After washing, dirt settles on the surface of the drum, which later turns into plaque. After some time, spots will begin to appear on the surface of the sealing gum, and then an unpleasant odor will appear. To solve this problem, it is necessary to scroll the machine once in idle mode. As a disinfectant, citric acid is used.

How to clean gum in a washing machine

It is quite easy to clean the sealing cuff; for this, folds are spread and the part is washed with a soapy solution using an ordinary foam sponge. After that, gum is wiped dry with a soft cloth. If mold is detected, a special cleaning composition is prepared from water and soda in the same proportions. The paste is used to remove dirt from the gum or the metal surface of the drum.

How to clean the drain hose in the washing machine

A specific smell can appear from a household appliance through the accumulation on the inner surfaces of particles of dirt, hair, fluff and other foreign small objects that have fallen out of clothing. All these substances pass through the filter and settle on the walls of the drain pipe, which can lead to clogging. To avoid this, it is necessary to clean this part at least once every three months.

How to clean the drain in the washing machine? To do this, lay the rag on the floor under the appliance, remove the decorative panel and substitute a small container to collect water. Unscrew the filter counterclockwise and collect the accumulated debris. To flush the hose, we bend the nozzle and drain the accumulated liquid into a previously prepared tank. After this, you need to completely remove the part from the sewer hole and the bottom of the washer, then rinse it under the pressure of water. Before carrying out such work, disconnect the household appliance from the power source.

In the presence of stable deposits and dirt on the surface of the corrugated tube, it is necessary to arm yourself with a soft brush with a non-metallic brush. Run this cable inside the nozzle and gently scroll to destroy the accumulation of debris. To completely clean the hose, you may need several cable passes.

How to clean the washing machine powder tray

When using hard water, a rough coating deposits on the surface of the tray. To solve this problem, the following steps must be taken:

• remove the container from the household appliance;
• wash spots with soda and wash off the substance with a jet of cold water;
•  pour into a small container of water, fall asleep a pack of citric acid;
• we put the tray in the solution and stand for several hours;
• we clean the plaque with a hard kitchen sponge or a toothbrush;
•  wipe and dry the part, install in place.

You can get rid of plaque without removing the tray. In this case, they act on a contaminated surface with a special cleaning agent, which is supplied from the spray gun or soda solution is used for this. The last substance is rubbed with a toothbrush, left for a while, then washed off with water.

How to clean a washing machine from smell

A specific smell appears in the washing machine if a buildup of cleaning products has formed on its internal surfaces. Time will pass and in places of deposits, mold appears, which depletes the undesirable aroma. To get rid of the smell is quite simple, you need to fill up the powder and turn on the device to the maximum temperature without linen. When the washing cycle ends, the inner surfaces, as well as the sealing gum, must be thoroughly wiped with a dry cloth.

Rules for caring for the washing machine

Proper care of the washing machine helps prevent unwanted deposits and unpleasant odors. There are several preventative actions to solve these problems:

• after each working cycle, wipe the sunroof and drum surface with a soft, dry cloth;
• wash the powder tank under a stream of hot water, then wipe dry;
• install a water filter on the supply hose (this will partially get rid of scale);
• do not leave the washed clothes in the typewriter;
• Keep stains on the outside of the appliance constantly.

To remove a newly formed stain, it is enough to wipe the coating with a soft cloth previously soaked in a dishwashing solution. With old stains and yellow patches, a solution of soda perfectly copes.