How to install an acrylic bathtub: preparing to install an acrylic bathtub

So you have become the proud owner of an acrylic bath. It's time to install it. How to do it? Need to urgently call the masters? You should not spend time and money on this, which are never superfluous. In fact, everything is quite simple and quick. How? Read on.

Preparing to install an acrylic bathtub

Before you begin to install the purchased acrylic bath, you need to carry out preliminary work - to prepare the place where you plan to install it, the design itself. Remove all excess from the bathroom, dismantle unnecessary equipment left over from the old bath. Stock up on the necessary tools and materials. You will need the following:

• the bath itself;
• legs from the kit or frame, which will serve as a support for the bowl;
• percussion instrument - hammer;
• grinder - to cut off excess elements;
instagram viewer
• punch - for making holes;
• sealant;
• fluid level;
• set of wrenches;
• insulating tape;
• construction tape;
• corrugated pipe ;
• fasteners.

Before you begin to install the design, you must do the following:

• the first thing to exclude the flow of water;
• to dismantle the existing bath;
• remove the drain;
• clean the drain hole;
• install a corrugation into the drain hole;
• the joints between the corrugation and the sewer hole should be treated with sealant;
• level the floor.

Can't wait to put on a new bath? It's time to start installing it!

The acrylic structure can be set using the following methods:

• use a metal frame;
• use the legs from the kit;
• install it on a brick support;
• set the bath on the brick podium.

How to set up their acrylic bath yourself

The rules for installing acrylic bathtubs allow any of the following options. If, opening the box, you find a metal frame, it is better to use it. If only supporting legs are included, feel free to install the product on them. They are made specifically for this model. During the development, the high-voltage zones of the structure were clearly taken into account.

Using the legs from the kit

Perhaps the easiest way to install a bath. It does not require special training and any special tools. Difficulties do not arise if you carefully follow the instructions that are in the package. If it requires holes to be drilled in the bowl, this must be done using a wood drill. The drill must be set to low speed. Installation on the support legs means that you need to screw them to the bowl and adjust in place:

1. Installation of legs. In the lower part of the bowl special places are made, it is difficult not to notice them, since they are indicated by special pictograms or stickers. To facilitate assembly, most manufacturers already make holes in the bottom at the factory. But if they are not there - it does not matter. You can always do them yourself. After the holes are prepared, the legs are fixed in them. If you install the legs in other places, then the load will be distributed unevenly, and this can lead to breakage.
2. Adjustment of supports. Almost any legs can be adjusted in height - this allows you to set the desired slope. To begin with, the bath must be installed close to the wall, and after that, adjust the supports, choosing the necessary height. Then you should set the structure horizontally. To do this, the level must be on the side. If necessary, the support can be twisted up or down.

Once the legs are in position, they should be locked. To enhance reliability, you can use plastic hooks and attach the bathtub to the wall.

Using a metal frame

If you follow the instructions exactly, you will get the most reliable fastening, and most importantly, very simple. The technology is as follows:

1. First of all, with the help of those screws that were put in the kit, the frame is assembled.
2. We tilt the half-finished frame to the side to facilitate installation work.
3. It is time to put the frame on the bathtub. We attach legs to the supports.
4. In the central part of the frame we fix the supports, we install a couple more along the wall, three supports outside the bowl.
5. Adjust the height of the supports. The design should not stand higher than sixty-five centimeters.
6. Now put the structure on its feet and check whether everything is exactly horizontal and vertical.
7. Now it’s time to put in the overflow and siphon.
8. Additionally, you can attach the bowl to the wall.
9. It remains to put the screen.

Reference! The frame with legs can be mounted directly on the floor, and only then install a bath on it. As a rule, additional fasteners are not required.

Using brick supports

If it happens that the metal frame is not in the package, the bath should be mounted on a brick podium. This is not the cheapest installation option, although the design will turn out to be very durable, but it will require a lot of brick. In addition, there will be an additional load, which does not really benefit the floors, because such a podium weighs a lot.

In order to make the construction cheaper and also reduce the weight that will put pressure on the floors, the bath is installed on brick supports. On such a design will take only twelve bricks and a little mortar.

During installation, we adhere to the following technology:

1. We bring the bath into the room where we plan to install it. We mark the places where the brick supports will cost.
2. Along the length of the bowl, we note the location of two or three columns. In this case, one should be in the center, and the other two at the edges.
3. Now we will take the product out of the room and proceed to laying the supports. They should be raised to a height of nineteen centimeters so that the total height of the structure above the floor does not exceed sixty-five centimeters.
4. We leave the masonry for a day to dry, then we connect the siphon and put it on the finished supports.
5. We use silicone sealant to seal the gaps between the support and the bottom.
6. We use metal hooks - we attach the bath to the wall.

Reference! Professionals advise applying foam to the bottom of the bath before installing it. Thus, we reduce the thermal conductivity, reduce the resonant ability and prevent damage to the bowl with brick supports.

Using a Brick Podium

If your bath does not have a metal frame, you have to lay a podium out of brick. This method is no worse than the option with brick columns, only it takes more time, and it is dirtier. For installation, you will need a saw, mounting foam, bricks, moisture-proof plywood and the actual solution.

Here is the whole simple technology:

1. We install the bath where it will be located in the future. We mark the place where the drain will be located. This must be done in order to provide a place for connecting the drain in the podium.
2. Under the whole bowl we spread the podium, its sides should be no more than sixty centimeters high. Do not forget that between the bricks and the bathroom there will still be about three centimeters of mounting foam.
3. Using moisture-proof plywood, we collect the box around the perimeter of the podium. Do not forget that plywood should rise above the podium to a height equal to the thickness of the mounting foam.
4. We cover the entire podium with mounting foam, lay a sheet of plywood on top of the foam.
5. We install the bath on the podium, check how everything is exactly worth it.
6. Pour water to half the bath. This will allow the foam to harden evenly. It is necessary to withstand the day before the foam completely hardens.
7. We connect the drain and overflow and hook the structure to the wall.

Modern bathtubs have an inclined bottom, which speeds up the flow of water. Therefore, place it exactly horizontally without making any biases.