How to check the TV for broken pixels: inspection in the selection process

Pixels are dots that create an image. The most important characteristic of a pixel is its ability to change colors. Thanks to the electricity supplied to the TV, trace elements are able to change their position. But there are also broken pixels. They are almost invisible, but when viewed, discomfort appears, since the points stand out from the background of the picture.

How to check the TV for broken pixels

To check for broken pixels, you can test using several photos of the same tone. To do this, do the following:

1. We find or download the necessary photos.
2. Save them to a USB drive.
3. We connect the USB flash drive through the appropriate port.
4. Image launches. On them you can see broken pixels.

If we need to find white pixels, use a black background, and for black - a white background. For red, blue and green - contrasting backgrounds.

Advice! If there are several of them very close to each other, you will notice a spot on which the image does not indulge.

Inspection in the selection process

Some stores allow you to inspect the TV for broken pixels before purchase. Workers do it themselves, but charge a fee for services. The way they work is the same, they use solid color pictures.

Note! Use the services of the store only when buying 4 TVs. In other models, this can be done independently. In the presence of defects, the company does not have the right to refuse to replace or repair.

With 4 TVs, everything is different. They have several million raster points. Sometimes, it is impossible to notice idle ones, even when checking through monophonic photographs. Here you should use the services of workers.

Note! When viewed in the store, replacement is possible even if their number is below the set limit (the TV works without problems). But if you already bought a device, brought it home, and only because you found it, the store has the right refuse free repair (this applies only to cases where the number of dead pixels acceptable).

Permissible number of dead pixels

The instructions that are sold with the TV should say how many dead points are allowed. As soon as their limit becomes higher than the permissible norm, the device is considered damaged. Most often, we buy TVs without defects, but the problem arises during operation. Therefore, the seller must give a guarantee providing a free repair.

Why they appear

There are a number of reasons why such defects may appear:

1. The matrix is ​​constantly overheating or supercooling. The temperature difference contributes to the hardening of the pixels, and they will not be able to move.
2. High humidity. When water gets on the screen substrate, highlighted dots appear.
3. Constant voltage drops. If you have problems with the mains, a transistor may malfunction. As a result, the current flowing to the pixels forces them to take a fixing position.
4. Manufacturing defects. Most often, they appear not in the process of creating a device, but in the process of checking for operability (for the three reasons listed above). That is why it is so important to check the TVs before purchase.
5. If the monitor shows the image for a long time (several hours) without changing it. This will lead to burnout of the transistor, and subsequently to freezing points. Even the most modern devices often break for this reason.
6. Damage in the delivery process. Before using the TV, they bring it home. You need to be careful when transporting, small jolts or pressure can damage several pixels.

Is it possible to recover broken pixels

Some color TVs are made so that you can restore this criterion at home (this applies to the Samsung brand). Two ways:

1. A video is downloaded on the Internet, the purpose of which is to warm the matrix. This video should work for about an hour, and warming up will help restore broken points.
2. We take a cotton swab and press on the damaged area. Do not overdo it, because with strong pressure, there may be more dead pixels.
3. If these methods do not work, you need to take the TV to an expert. He can fix it.

Before buying a TV, you must definitely check all the parameters. This will protect you from unnecessary nerves in the future and unforeseen expenses.