It is hard to imagine a cozy house without a carpet. He not only protects his feet from the coolness of the floor, but also pleases the eye with aesthetics, gives the interior a special charm and completeness. Or it collects dust perfectly and reluctantly parted with pet hair stuck in the pile. And if the carpet is laid in the hallway or living room, then homeowners involuntarily have to become aces at the choice of dry cleaners or cleaning companies. Well, or at home floor cleaning specialists with tools like Vanish.
The basics of preparation
The content of the article
- The basics of preparation
- Instructions for use
- Notes
The brand's products are represented by four categories of carpet cleaners. The specifics of working with each of them includes a number of nuances. But no matter what Vanish was elected, in order to achieve the desired effect, simple rules must be observed.
- Before applying the product, you need to vacuum the carpet well. It is important not to forget about the wrong side - it is also thoroughly cleaned of dust and dirt particles.
- Before the first use, it is advisable to check the aggressiveness of Vanish on the paint. To do this, a small amount of it is applied to the carpet in an inconspicuous place and left for 5-10 minutes. If during this time the color of the coating has not changed, then you can begin to work. Otherwise, it is better to abandon the use of an aggressive formula and find an analogue with a milder effect;
- The manufacturer categorically does not recommend using liquid forms of release on carpets made of materials not intended for wet cleaning (silk, handwork, etc.).
Advice from experienced users: Thorough cleaning is best done during the warmer months. So it will be possible to well ventilate the room, providing optimal conditions for the quick drying of the carpet.
Instructions for use
Vanish products include general cleaning products and urgent removal of contaminants. The first group includes:
- shampoo for manual cleaning (antibacterial and simple);
- shampoo for washing vacuum cleaners;
- moistened powder.
Only active foam produced in spray cans can be assigned to the second group.
Hand Shampoo mixed with warm (not higher than 40 degrees) water in a ratio of 1: 9. Then, using a soft sponge, the solution is whipped until a dense foam is formed. To evenly apply it manually on the carpet, you may need a brush with hard bristles. After 2 hours or after the foam has completely dried, the surface treated by Vanish is thoroughly vacuumed.
Shampoo for washing vacuum cleaners Before refueling the tank, dilute: 33 ml (1.5 caps) per liter of warm water. Further carpet processing is carried out according to the instructions from the manufacturer of the vacuum cleaner.
Severely contaminated areas can be pre-treated with a Vanish solution whipped into the foam, which is left on the surface until it completely dries.
Wet powder shake well and then distribute evenly on the carpet with a brush or a damp cloth. After 20 minutes, it will completely dry, after which it should be removed with a vacuum cleaner.
Active foam also needs preliminary shaking, after which it is applied to the contaminated area. After 2 hours, the treated area is thoroughly vacuum cleaned.
Notes
When working with liquid forms of the product, over-wetting of the treated surface should be avoided. Otherwise, there is a risk of divorce. Vanish shampoos are not interchangeable: the product for manual cleaning must not be poured into a washing vacuum cleaner. And finally: do not wait for a miracle - strong pollution can not be eliminated the first time. It will take several treatments, between which it is recommended to properly withstand the pause necessary for the carpet to completely dry.
