Why the mirror in the shower encloses: how to care for the mirror.

Recently, many people prefer to install functional showers instead of large bathtubs. They are convenient to use, significantly save the space of a cramped bathroom, but also require special attention. This also applies to mirrors, if available in the shower. Under the influence of adverse factors, it can quickly lose its attractive appearance and become unusable. To extend its service life will help compliance with certain recommendations.

Why the mirror in the shower

Any mirrors need careful maintenance, especially in bathrooms, which are characterized by the following parameters:

• temperature differences;
• high humidity;
• plenty of steam and inadequate air circulation.

A constant presence in these conditions can lead to the destruction of the reflective layer near the mirror, as a result of which it will fade and eventually cease to fulfill its purpose. Experts emphasize that the service life of a mirror surface in many respects depends on the materials used in the manufacture.

ATTENTION! Under the influence of steam and moisture, aluminum amalgam quickly cracks, therefore, in rooms with high humidity, it is recommended to use products with a silver base, although they are significantly expensive.

Regardless of the type of amalgam, it is important to provide the elements of the shower with thorough care and additional protection against moisture.

How to care for a mirror in the shower

Mirrors in the shower cabin often become unusable, as they are constantly exposed to adverse factors. How to prevent this? The destruction of the reflective layer begins with the perimeter, so you can paste the edges with ordinary tape. This little trick helps to significantly extend the life of the mirror. For prevention purposes, it is also recommended to minimize the impact of negative conditions:

• think about an exhaust ventilation device;
• after use do not close the doors of the shower cubicle;
• ventilate the bathroom more often;
• wipe the mirror surface dry after each shower.

REFERENCE! To make the glass less foggy, it is treated with glycerin or gelatin solution (1 tablespoon per 1 glass of water). For these purposes, a special tool that motorists use is also suitable.

In addition, regular cleaning will help to maintain an aesthetically pleasing look. The main thing is to implement it in accordance with all the rules. First, dust and possible contaminants are removed with a soft dry cloth (it is not recommended to skip this step, otherwise we will only wipe off all the dirt with the next wet wipe and complicate our task). After getting rid of dust, the surface is treated with a special detergent for glass. In the end, everything is polished with newspapers, removing stains.

IMPORTANT! Do not use hard brushes during cleaning. You should take a soft flannel cloth or paper towels so as not to scratch anything.

Thus, to maintain the attractive appearance of the mirror, it is enough to wipe it with a soft dry cloth after each use of the shower. It is also necessary to regularly clean with cleaning agents. Some folk recipes will help to shine:

1. Leave lemon juice on the reflective surface briefly and then rub it thoroughly with a soft cloth.
2. You can use ordinary potatoes. There will be no trace of dirt if you rub the surface well with half a raw tuber, then rinse it with water and wipe it dry.
3. You can restore the original shine using ammonia, which is diluted in equal proportions with water. The resulting solution must be thoroughly wiped with glass and polished with crumpled newspaper sheets or paper towels.
4. Mirrors in the shower cabin can be easily cleaned with vodka diluted with water (in a ratio of 1: 2).
5. Brewed tea, a solution of vinegar and some other improvised products will help restore purity to the product.

Proper care requires some effort, but all the work pays off by increasing the life of the mirror and preserving its original appearance for a long time.