How to install a sink with a curbstone in the bathroom: choosing a place, features of proper installation.

click fraud protection

Washbasin with washbasin.The modern building materials market offers a wide range of sanitary ware and furniture for equipping bathrooms for every taste. The most popular among consumers are models of washbasins with cabinets. They mask the liner of communications, harmoniously blending into any interior, and are also convenient in operation. Drawers and built-in shelves are additionally used for storage of household chemicals and cosmetics. Installation of the structure should be entrusted to specialists or carried out independently if there are suitable tools and skills.

How to choose a place to install a sink with a cabinet

The content of the article

  • How to choose a place to install a sink with a cabinet
  • Correct installation of the washbasin
  • Features of installing a hanging table in the bathroom
  • General recommendations

How to choose a place to install a sink with a curbstone.Before going to the store behind the washbasin, you need to measure the place for its installation and only after that purchase a product of the appropriate dimensions, which will be comfortable to use.

instagram viewer
Usually, the installation of a new sink is carried out on the site of the previous one based on the scheme of the laid communications. However, this option is not suitable during the redevelopment of the bathroom, or when the water supply has not yet been carried out. In this case, it is necessary to carefully measure and divide the room into sections in order to rationally arrange plumbing equipment, furniture and accessories. When choosing a place for a pedestal, consider the following nuances:

  1. The place for installation of the washbasin is determined before the installation work is carried out.
  2. It is important to pre-design and calculate the output level of water supply fittings.
  3. So that the cabinet does not interfere with the pipes in the wall, you will have to slightly shift or cut the shelves. Cutouts need to be done carefully so as not to spoil the outer surface of the furniture.
  4. If the sewer is located near the floor, the bottom of the product is also cut so that it is possible to connect the sewer pipe and the siphon. The edge of the resulting hole should be treated with a protective compound.
  5. Whenever possible, it is recommended that the piping for water and sewage be placed together.

Correct installation of the washbasin

After choosing the best place for the sink, you need to purchase a product of the appropriate size. Installing the sink and cabinet will consist of the following steps:

  • assembly;
  • fastening of the structure;
  • connection to engineering systems.

Correct installation of a sink with a curbstone.Typically, cabinet furniture is equipped with all the necessary fasteners, fittings and instructions that you need to carefully study and follow it to avoid mistakes. The assembled cabinet is placed at the intended location and it is checked whether everything is suitable in size. If necessary, using a hacksaw, holes are made for pipes so that the structure can be freely installed.

REFERENCE! During installation, it is necessary to ensure that all parts are carefully secured, since after installing the sink it will be difficult to tighten the screws.

The assembly of the sink begins with the markings on the wall. The horizontal position of the sink is checked using the level and, if necessary, adjust the height of the legs of the cabinet. After that, the washbasin attachment points are marked on the wall and holes are made corresponding to the size of the fasteners. The washbasin is fixed on strong anchor screws or metal studs.

The cabinet itself is attached to the wall with dowels or silicone. After installing the curbstones, the mixer is mounted and connected to engineering systems using union nuts. At the end, a siphon is connected to the sewer pipe.

ATTENTION! The cracks formed at the joints must be lubricated with a special sealant to prevent leaks.

After some time, you can use the sink, making sure that nothing is leaking. If a leak is detected, it is necessary to turn off the water, disassemble the structure and eliminate the cause of the malfunction (wind up with sealing tape), then collect everything and try again.

If desired, a mirror can be placed on the wall above the sink. For an aesthetic combination, it is better to immediately buy a stand with it.

Features of installing a hanging table in the bathroom

Installation of a hanging table in the bathroom.The original decision of the designers is to place a wall cabinet with a sink in the bathroom. The base should be quite solid, so installation is possible only on a concrete or brick wall.

IMPORTANT! Hanging shells cannot be fixed to wall paneling, drywall constructions and other surfaces with low strength.

The installation process of suspended structures is different. It is necessary to take into account some nuances. First you need to determine where the cabinet will be located, and make marks for the holes for fasteners.

ATTENTION! Since the pendant structure does not have adjustable legs, accurate marking is very important.

Choosing the height of the washbasin, you need to consider whether there are children or tall adults in the house, so that it is convenient for everyone to use the sink. The next installation steps are drilling holes and installing dowels. Next, we assemble the cabinet body, following the manufacturer's instructions.

The assembled body is attached to the wall and its position is checked using a level gauge. The installation of swing doors and retractable structures is carried out after the housing is finally fixed. As for the washstand itself, usually in wall mounted models it is fixed in the construction of the cabinet, but sometimes it is attached to the wall for greater strength.

General recommendations

The sink built into the cabinet should look harmoniously in the overall design of the room, as well as be strong and functional for long-term and comfortable use. Particular attention should be paid to fixtures so that the structure does not suddenly fall apart.

It is recommended to purchase ready-made kits with a built-in sink, otherwise you may encounter a size mismatch. When choosing a product, it is important to pay attention not only to its height and appearance, but also to the width so that the doors of the cabinet can freely open in a small space of the bathroom.

As for the proper installation of plumbing equipment, it can be carried out independently without the help of specialists. The main thing is to correctly determine the location of the sink, choose the appropriate model and carry out the installation, following all the instructions.

How to install a stainless steel sink on a pedestal: what you need for installation, methods and installation process.

How to install a stainless steel sink on a pedestal: what you need for installation, methods and installation process.Stand

Sink is an integral element of any kitchen. There are many variations of this attribute. The best option is a model built into the cabinet. Anyone can install it with their own hands, the main thi...

Read More
How to install a sink with a curbstone in the bathroom: choosing a place, features of proper installation.

How to install a sink with a curbstone in the bathroom: choosing a place, features of proper installation.Stand

The modern building materials market offers a wide range of sanitary ware and furniture for equipping bathrooms for every taste. The most popular among consumers are models of washbasins with cabi...

Read More
How to remove a drawer with a door closer from the cabinet: basic rules

How to remove a drawer with a door closer from the cabinet: basic rulesStand

Designs with telescopic rails have become the most common solution for furniture, especially the kitchen. During operation, sometimes it becomes necessary to completely remove the furniture drawer...

Read More
Instagram story viewer