From what we can headboard: headboard with his own hands, out of an old door, a soft pillow

Head of the bed is one of the brightest elements in the bedroom. By its beauty and reliability depends largely on healthy sleep and mood. Besides an aesthetic function, it can significantly insulate the cold wall or provide additional sound insulation.

What to do if your furniture does not have a headboard? Do not be upset, because the head can be done independently.

From what we can do on their own headboard

Headboard can be made for the different ways of the bed. The most simple and traditional decoration refers wall paintings or photographs. And you can paste over the wall with photo wallpapers. Due to the high level of printing an opportunity to order almost any figure. It does not lose its relevance and textiles in the interior.

Attention! With the help of paints and brushes can be done painting the walls above the bed.

In this case, useful purchased stencils. Special spray pattern can be decorated with a wall in the form of graffiti.

In addition to the head of the drawing, you can make a decorative wooden piece or a cozy cushioned headboard.

How to make a headboard from an old door

Using old doors as the main component for the headboard upholstered furniture is one of the most unusual design approaches in the interior.

Suitable for decorating is not any doors. Beautiful vintage door will look unusual shape of the tree. You can also independently make them look obsharpannosti and contorted and paint in the desired color. In specialty stores, you can find beautiful decorative items, antique.

Preparing a door, you need to determine what the situation is better to give it. Most often it is mounted horizontally. Sometimes designers offer vertical placement of doors. This method is suitable for large free spaces with high ceilings. But one door in this case can not do.

When installing doors, as head of the bed the first thing you remember about safety. The design must be securely fastened.

Important! Better if on the surface of the door will not be handles or other protruding elements.

How to make a soft pillow with his hands

To make a soft cover for the bed, should prepare in advance a sheet of plywood, fabric for the base and for the exterior finish, foam or other filler, a stapler and a jigsaw.

without constriction

This method is one of the most versatile and does not require hauling furniture.

Observe the following sequence of actions.

• Spend the necessary measurements. You need to know the dimensions of the future product.
• Piece of plywood cut out on the basis of required parameters. This may be a rectangle, square, and any other configuration.
• On a sheet of plywood laid several layers of filler depending on the desired volume.
• We do upholstery fabric filler for the basePre stapler and secure it to the outer part of the board.
• Next, in the same way Cushioning furniture selected tissue.
• You can show imagination and add decorative elements.

Of the small squares

Beautifully will look panel of many small squares in several rows. Manufacturing technology of the small square is exactly the same as in the case of the uniform panel. Only they are also grouped together and glued to a separate plywood.

Important! As a basis we can take the head of the old dismantled furniture, and as a filler to use unnecessary mattress.

By type ties Karetnaya

A large demand for the type of pillow uses Karetnaya ties. Consider the process of manufacturing stages.

• Making blank of plywood foam and the required parameters and configuration.
• Cut a hole in the plywood in accordance with the selected pattern screed. It may be squares or diamonds.
• The same pattern repeat on the paper.
• Laid the paper on the foam and use a bright marker set point for future openings.
  In the marked locations to make the holes.
• Further glue foam so that the holes in the material exactly the same.
• On foam glue sintepon with exactly the same grooves.
• The fabric is stretched and anchoring stapler.
• You can take a ready-made buttons interesting and better obtyanut of the same material as the panel. Sew on buttons in a pre-planned place and fasten with thick thread starting from the product center.

Bed occupies a central place in the sleeping room. Its design must be in harmony with the design of the room. Following simple tips and guidelines, it is possible to make the head with his own hands, without additional financial costs.