Welding table with his hands: step by step assembly instructions

Qualifications market every year is expanding due to growing technological advances. But the workers will be in demand profession in the same way as before. To expert on the business received a decent salary for his work, he will need to improve their qualifications. And where else is doing it, except in the studio? Every professional need to work, equipped with a place that remains to do a man whose hands grow from the right place, but not enough money. Right decision - to do the work surface itself. If turners and carpenters all clear, every one of them about imagine how should look like their desktop.

Table for welding

Welder - a very specialized profession that requires certain working conditions. Of course, the equipment and the equipment must comply with all safety regulations. Helmet or glasses - will help protect your eyes from sparks. Gloves from burns. As well as form elements, welding table should be as protected from accidents.

For this purpose, the welding table to do a through (holes in an iron cloth or pipes welded together). This is to ensure that the last elements of the welding unit did not get to the surface and could not something to ignite. The design has to withstand heavy loads, because the main objects, works with specialist welder weigh pretty well. At work must be strictly applicable as from the measurement standards to the table is not looked and did not cause harm during the operation.

Of the main advantages of this design need to be distinguished:

1. Profitability and economy - in the presence of skills, you can easily build a welding table, without making large production costs.
2. Individuality - the table will be placed just under the man who will be working on it. The parameters must be taken into account from the growth and scope of work.

Do not forget about the hood, which is to take some of the air with the content of gases and hazardous metals. Such a thing would be very helpful if the workshop is far from the fresh air.

As the backlight may be any lamp or LED lamp. Here the question is in the natural working space illumination.

When working on a table manufacturer must not be forgotten that the metals should be non-toxic. Such harmful poisons allocates iron with a content of copper and zinc. It will be much better if all facing materials are from non-combustible materials.

It should be noted that the execution of the construction, which will be less than one meter - a very impractical. Because of the standing of progress, it will be inconvenient to bend with the device in hand, which may affect the health of the spine.

Attention! The construction is a frame of profile pipes and four strut-legs. As countertop can act as metal web or shaped tubes.

Required tools

As the required tools and materials required:

1. Welding machine for works.
2. Marker tape measure, square will serve for marking and measuring work.
3. Clamps and vise clamps will work on welding.
4. Punch.
5. Sander or a large amount of sandpaper and a file to clean the pipe surface.
6. Drill help when installing legs nozzles, if required for the welder. It is necessary to select a drill diameter bolts thickness.
7. Materials for cooking: the profile tubes with a diameter of 60x60.
8. Nuts and bolts. Best suitable circular screw, length 8 cm.
9. Jigsaw and Bulgarian.
10. Clippers.

Measurements and drawings

To perform the correct operation, which will meet all the requirements of a welder, you need to work on the size and quality to perform all measurements of pipes.

The thickness of the connecting pipe should not be less than two millimeters. There was a process not to damage the work surface from the burning effects of welding. In cross section the pipe must be 60h60h2-4.

At the height of the future of table legs should be about one meter, if this is not possible, you can use a length of 800 mm.

Step-by-step instruction

1. Pipes are divided using a cutting disc grinder with metal. Burrs and chips processed file. The main frame 1000h800 mm made primarily to allow it to be welded legs. The legs are set by the angle that they are not skewed during welding. Clamps are clamped to the metal is not "walking" during operation.
2. Inside the frame segments placed profiled pipes 800 mm in length, the distance therebetween need about 50-70 mm. After welding of these parts of the structure, all seams are stripped grinder. The lower frame is manufactured in a similar manner, only one segment length is 992 mm and 792 mm inclusive.
3. If a table is transported in the shop, you need to install the pre-leg on wheels. Depending on their shape and form, we will see how best to fix them - on bolts or welded. In the best case, set the brake clamps that will not let go the table randomly during operation.
4. To make it easy to store the material and the welding machine, it is recommended welded to the lower sheet metal frame, the same size as the frame. Angles original mark and drank grinder, jigsaw. web thickness should be larger than 4 mm so as not to lower the level countertop pressed. On each side do at least 2-3 welds.
5. Additionally, set the hooks and telescopic pipe, which will carry the table freely and conveniently. It is made of a circular tube, in 3 cm in diameter, which is folded on each side, so that the original version looked like a flattened letter "P".
6. After the main types of work, it is necessary to process a future table surface - sand or treat sander. To avoid unpleasant contact with iron filings into the lungs, it is recommended to wear a respirator mask, and eye wear glasses. When finished processing, many masters to all cases prefer to paint their products to save their life and make beautiful aesthetic appearance. But to do it in this case is meaningless, because when working with gas-welding machine, coating all countertops will evaporate into the air.

Reference! When all the work has been completed, and the shop-shop has been removed, it is necessary to place the entire inventory in its place.

Welder will find its place on the underside of the table top, in a separate wooden box, you can put all the electrodes and nozzles. To avoid confusion in the wires can be wound on their pre-cooked hanger.