There is no toner in the printer, which means what to do.

A growing number of computer users are purchasing printers for themselves - these devices are very useful nowadays when there is a need. constantly print a large amount of a variety of different information - documents, abstracts or just any files that can be viewed from a PC screen conveniently.

But sometimes you have to face some difficulties in the operation of the device. What should I do if a strange “no toner” notification appears on the computer and is it possible for a novice to deal with a problem? You will learn about all this in this article.

What does “no toner in the printer” mean?

Not everyone is familiar with the definition of the word “toner,” so the user may simply not understand what exactly is missing for the correct operation of the printing device. In most cases, such a notification appears within a fairly short time after the last refill of the cartridge.

There may be several reasons for the problem. But first you need to figure out what is toner.

What is toner

Toner is a special powder that is used to apply on paper. Users can also call it simply paint.

Such a powder is made specifically for printers and is produced in only four colors: black, red, blue and yellow. Other shades are achieved by mixing these colors - in this way you can achieve almost any color combination, which makes modern color printers an indispensable thing in everyday life.

Toners are inserted into laser printers like familiar cartridges. Now let’s take a closer look at what the word “no toner” appears on the screen and what it goes for.

Why is he not

There can be only two options: you have run out of “paint” and it is time to buy a new cartridge, or the printer has any problems that need to be fixed immediately.

IMPORTANT! Pay attention to how the printer informs you when toner is low - when the paint starts to run out, a special sensor comes into action, which shows you notification. After that, the printer counts 200 copies, after printing of which the operation of the device is automatically blocked, even if there is still enough ink for several pages of printed text or photos.

What to do

To eliminate the possibility of breakage, you can try to restore the work programmatically. This will not require the presence of special skills or deep knowledge in the field of technology, so any ordinary user will cope with the task.

First of all, turn on the printer and wait until all the necessary preparatory operations are completed - this can be determined using the volume level of the noise produced by the device. Then open the lid and click on the “Stop” button, after which - “Start” and “Up”. Then hold down the Down button until the zeros appear on the display.

After that, do not forget to click “OK” and close the printer cover.

Another option will be the printer firmware, which needs to be done only once, but this method is slightly more complicated than the one described above. More advanced users can also try to restore the printer using the hardware method - in this case, you will have to disassemble the device. If you are not sure that you can handle it and you can return everything to its place, it is better not to do this.

Now you know what toner is and why the printer may suddenly start showing a “No toner” notification. In order to solve this problem, you just need to make a few simple manipulations, after which the printing device will again begin to work in the usual mode.